video corpo
Add to favorites

#Product Trends

TECHNOLOGY AND CUTTING PERFORMANCES WITH NO EQUALS!

Shark 350 CNC HS 4.0, automatic double-column bandsaw for 0° cuts on structural, stainless and alloys teels, profiles and solidparts, with dimensions up to 350×350 mm.

Standard machine features:

+ Motorized chip conveyor which can be assembled on the left or right handside of the machine

– This sawing machine also features a semiautomatic cutting cycle and uses latest generation technologies; indeed, Shark 350 CNC HS 4.0 is equipped with a controller with processor RISC 32 bit 200 MHz with integrated interface to:

– Install a GSM card (OPTIONAL) to send an SMS to the programmed number notifying the type of emergency occurred while the machine was operating unattended.

– Connect to an Ethernet network for the remote assistance service.

– Get software updates and changes by e-mail, that are transferred to USB port by SD or MMC card and later on the control memory, through the suitable slot on the control console.

– Choose in the library (that can be extended by the user) the material type, geometry and hardness, the type of blade to be used and the control automatically sets the feed rate and the band rotation speed.

- 8” touch screen display operator interface and pushbuttons for all functions of the sawing machine.

– The limits of the head stroke are programmed through the console, depending on the dimensions of the bars to be cut.

– CNC machine to store up to 300 cutting programs each with different quantity and length.

– Structure in sturdy cast iron, to absorb vibrations and give the machine a better cutting stability and longer blade life.

– Cutting head downfeed movement with brushless motor and 40mm diameter recirculating ballscrewnut, in order to obtain the maximum rigiditiy during the cut and to control and check the cutting parameters inputted in real time.

– Infinitely adjustable cutting speed from 15 to 115 m/min by vector inverter.

– Bar feeder with recirculating ballsscrew/nut and steppermotor, feed in length in one stroke 600 mm, that can be repeated in order to cut any length).

– Minimum bar remnant of 120 mm in automatic operation. (OPTIONAL feeder jaws to reduce the remnant to min. 25 mm)

– Self-aligning feeder vice unit for feeding even not straight bars.

– Automatic adjustment of the front blade-guide head according to the dimensions of the bars to be cut.

– Electro-mechanical servo-system for the blade dynamic tensioning.

– Blade deviation ( OPTIONAL)

Details

  • MEP