Shark 230 NC hs 5.0 automatic bandsaw: BEST PERFORMANCE, LOWEST SIZE!

- It cuts dimensions up to 230x230 mm and can operate also in semi-automatic cycle.

- CNC machine with controlled double axis so as to obtain, on the same bar, 1000 different lots each of different lengths and quantities.

- CNC machine with a new controller : MEP 50 with Windows “CE” based. This new PLC has been specifically designed by MEP for the automation of its range of products.

OTHER FEATURES

- 7” touch screen display operator interface and push buttons for all functions of the sawing machine. It is simple and intuitive, it guarantees a reliable use and it controls all cutting parameters in real time.

- Structure in sturdy cast iron G25, to absorb vibrations and give the machine a better cutting stability and longer blade life.

- Ergonomically positioned on the front side of the machine, the control panel allows for easy viewing of machine operations and job set up.

- Infinitely adjustable cutting speed from 15 to 100 m/min controlled by an AC inverter drive system.

- Automatic acquisition of the actual starting point of the cut.

- Saw frame movement on linear guide with ball-recirculating pre-charged slide.

- Cutting head and feeding vice positioning with joystick.

- Automatic adaptive shearing stress control system with servovalve mounted directly on the cylinder.

- Manual band tension with LED display on control panel.

- Hydraulic power pack to supply the saw frame and the feeding and cutting vices. Variable pressure adjusters allow to set the clamping force.

- Feeding length up to 500 mm in a single stroke driven by a stepper motor and ball screw assembly.

- Feeder vice with sideways movement for self-adjustment in case of bars slightly deformed.

- Automatic retract of back jaw feeder vice to help the feed-in of bars heavily deformed (OPTIONAL).

- Driving pulley secured by tapered hub to ensure a strong fastening still allowing axial adjustment.

- Adjustable blade-guide heads in steel with carbide guide inserts, coolant taps for the traditional lubrication and preset to install the mist lubrication (OPTIONAL).

- Automatic adjustment of the front blade-guide head according to the dimensions of the bars to be cut.

- Two vertical rollers to help aligning the material.

- Blade brush driven off band wheel.