#Product Trends
AUTOMATIC SAW WHICH MADE HISTORY!
TIGER 352 NC 5.0, electro-pneumatic automatic vertical sawing machine which can operate also in semi-automatic mode, to cut from 60° left to 45° right, with HSS blade.
- CNC machine with a new controller: MEP 50 with Windows “CE” based. This new PLC has been specifically designed by MEP for the automation of its range of products.
A FEW FEATURES:
- 7” touch screen display operator interface and push buttons for all functions of the sawing machine. It is simple and intuitive, it guarantees a reliable use and it controls all cutting parameters in real time.
- Console with all centralized controls, installed on an articulated arm to follow the operator in every operating position for the controls and the EMERGENCY.
- Registration of alarms and events with the possibility to visualize the story of occurred events.
- Bar feeder with recirculating balls screw/nut and stepper motor (feed in length in one stroke 600 mm, that can be repeated in order to cut any length).
- Optimization of the torque in two ranges (12÷40 and 36÷120 rpm ) combining the inverter featu- res with the mechanical gear change (OPTIONAL 15÷50 and 45÷150 rpm with 3,0 kw motor and 5,5 kw inverter).
- Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.
- Double set of gears to obtain a high performance. - Sawing head movement on double linear guides with preloaded slides with recirculating ballscrews.
- Coaxial cylinder with bypass valve for fast approach and linear transducer for head position reading.
- Cutting head and feeding vice positioning with joystick.
- Automatic acquisition of the actual starting point of the cut.
- Shearing stress control.
- Rotating table on a center pin with axial bearing which allows higher precision on the cutting angle set.
- Pneumatic vertical vice.
- Electric pump for the blade lubrication and cooling.
- Wire chip brush for band cleaning.
- Indicator with flashing light in case cycle is stopped.
- HSS blade Ø 350x32x2.5 for solids or sections.
- Preset to be equipped with the spray mist system (OPTIONAL), as well as with the standard- delivered traditional lubrication with emulsible oil.
- Service keys and instructions manual for maintenance and spare parts list.