AUTOMATIC SAW WHICH MADE HISTORY

COBRA 352 NC 5.0, automatic/semi-automatic electropneumatic CNC sawing machine to cut aluminium and light alloys using blade with electrowelded hard-metal plates (HM).

he machine cuts from 45° right to 45° left and the head tilts from 0° to 45° left so as to make inclined cuts.

- CNC machine with a new controller: MEP 50 with Windows “CE” based. This new PLC has been specifically designed by MEP for the automation of its range of products.

A FEW FEATURES:

- Console with all centralized controls, installed on an articulated arm to follow the operator in every operating position for the controls and the EMERGENCY.

-7” touch screen display operator interface and push buttons for all functions of the sawing machine. It is simple and intuitive , it guarantees a reliable use and it controls all cutting parameters in real time.

- Registration of alarms and events with the possibility to visualize the story of occurred events. - Bar feeder with recirculating balls screw/nut and stepper motor (feed in length in one stroke 600 mm, that can be repeated in order to cut any length).

- Panel with low tension controls: polyester membrane keypad with tactile thermo-shaped buttons which give out an acoustic signal when pressed.

- Cutting head and feeding vice positioning with joystick.

- Automatic acquisition of the actual starting point of the cut.

- Rotating table mounted on bearing for a smooth and precise rotation.

- Material is clamped by means of two pneumatic vices which can be freely positioned along the longitudinal axis of the material.

- Adjustable mechanical stops at 0° and 45° left/ right to position the head quickly.

- Chip conveyor predisposed to mount optional chip collector (OPTIONAL).

- Shearing stress control.

- Pneumatic vertical vice.

- Automatic device to lubricate the blade only when the machine is cutting.

- Indicator with flashing light in case cycle is stopped.

- The machine is supplied without saw blade.

- Preset to be equipped with the spray mist system (OPTIONAL), as well as with the standard- delivered traditional lubrication with emulsible oil.

- Service keys and instructions manual for maintenance and spare parts list.