SPECIAL OFFER! Brass filler plug with vent valve G. 1/4"

Threaded metal plug made from brass with FASIT202 fiber seal.

This version is used when venting of the reservoir is required, only in case of internal over-pressurization. The pre-tensioned spring of the valve will allow the valve disc to be lifted from its seat at a pressure of 0.4 bar (± 0,1), thus allowing the air to escape: when the pressure is reduced after venting, the valve will close and stop air to entering the reservoir, it will also prevent oil overflow through the plug’s valve due to oil movement whilst in the closed position.

SPECIAL EXECUTION WITH HEXAGON 18,5 MM (to be assembled using a 19 mm key)

Single batch: 1740 pcs (ready in stock)

Special price: 0,50 Euro

TAKE ADVANTAGE OF THIS SPECIAL OFFER!

Details

Miselli

Associated Trend items

Extended level gauges: Miselli Srl (Italy)

To fulfill customer needs, it has been design this kind of level gauges whose length can be selected directly by the user. It was projected for those applications which require large center-to-center distance greater then 254 mm standard. The external protection in aluminum and the transparent body in polycarbonate can be made following special customized measures (over the standard ones of 300 mm, 400 mm, 500 mm): also, the side visibility of the fluid is allowed by the possibility of rotate 90° degrees the body in aluminum. The mounting of this accessory can be made externally or internally the tank. It can also be supplied with analogue thermometer graduated 0 ° -120 ° C.

This product fully reflects the cornerstones of the mission of Miselli Srl: quality and flexibility in customer service.

More information

Compare

Remove all

Compare up to 10 products