NEW: pneumatic flow regulator by Nordson Industrial Coating Systems

The 1209-530 Series mastic fluid regulator provides accurate material regulation for a large variety of applications. Mastic regulators are used where one pump supplies multiple guns to dispense mastics and other semi-solid materials or when it is important to operate guns at lower fluid pressures.

Mastic regulators are used where one pump supplies multiple guns to dispense mastics and other semi-solid materials or when it is important to operate guns at lower fluid pressures.

When the regulators are installed ahead of each dispense gun, they control pressure so the guns furthest from the pump have sufficient pressure for effective operation, and those close to the pump are not over-pressured. They also moderate flow surges when line valves are opened or when pump changeover occurs.

Application methods include extrude, shower, stream, swirl and spray.

Features and Benefits

Provides consistent material pressure from the supply

source to the dispense valve or metering systems

Pneumatic regulator can be mounted on the regulator

or remotely for convenient control

Accepts up to 5000 psi (345 bar; 34.5 MPa) inlet

pressure and 500 to 3500 psi (34 to 241 bar; 3.4 to

24.1 MPa) outlet pressure

Carbon steel construction with carbide ball and seat

High-pressure and high-volume flow rate capable

3/4" NPT fluid ports

Typical Applications

Underbody and Sealer

Anti-Flutter Mastic

Structural Adhesive

Sound Deadener

Powertrain Sealers

Metering System Supply

Materials

Urethanes

Epoxies

Silicones

PVC Sealers

Lubricant