Launched CBN High Efficient Radius End Mill SHR320

* Reference value of interference angle after length of cut is 15°.

* Actual measurement required, in order to avoid interference between tool and work material.

※Depth of cut is for contour line milling as the value of reference. Please adjust it depending on machine rigidity and processing

method.

※Ramping approach with angle 3ﾟor smaller is recommended.

※Recommend leaving uniform finishing allowance on the machined surface in the pre-stage cutting (semi-finishing).

※When cutting high load sections or complex shapes, it requires attention to condition setting and tool path.

※Adjust both spindle speed and feed at the same rate.

※Oil mist coolant is recommended.