video corpo
Add to favorites

#Industry News

Fiber Laser Marking Machine Maintenance Knowledge-Series 1 Requirements Before Operation

Fiber Laser Marking Machine

The fiber laser marking machine's laser beam output is invisible high-intensity light. It is forbidden to operate the cnc fiber laser marking machine without professional training.

1.Environment: The high precise fiber laser marking machine should be placed in an air-conditioned room.

2.Temperature: Please use the fiber laser marking machine with a temperature of 10 ° C -35 ° C.

Dust free and non-corrosive atmosphere.

Hot weather will disturb the water cooling system.

Please effectively cool the laser assembly, otherwise it will reduces the life of the machine and even damages critical laser components (such as diode module, mirror, Q switch).

3.Clean: Keep all laser parts dry, clean/dustproof.

4.Humidity: When the fiber laser marking machine is working in a high humidity environment,

Please pay attention to the lens and laser diode module.

Avoid blurring and getting wet of the lens and laser diode modules.

Slightly wipe the “mirror” and “F-theta lens” inside the laser bridge with absorbent cotton or dehydrated ethanol and clean it once a week.

If you find that the Output Mirror and Beam Expander are dusty or contaminated, follow the same procedure.

5.Increase the laser power when the output laser power drops:When the output laser power drops, adjust the nut of the laser lens slightly until the output spot is round and bright.

The output laser beam has been adjusted to the optimum working condition at the factory.

6.Strictly follow the operating procedures: Please turn the fiber laser marking machine on or off in strict accordance with the order in the operating manual.

Improper operation can shorten the life of the cnc fiber laser marking machine and damage the equipment.

The manufacturer will not be responsible for the resulting responsibility.

PEDB-400B

Details

  • Wuhan, Hubei, China
  • Perfect Laser (Wuhan) Co., Ltd.