Air volume booster AVB series

AVB Series air flow amplifiers increase the operating speed of any type of valves when these are actuated by large internal volume actuator or controlled through long pneumatic tubing. AVB series air flow amplifiers also allow the replacement of the control devices (ex. Positioner) while keeping the pressure to the actuator.

- Port size 3/8" to 3/4"

- Aluminium or 316 body

- High / low température

- Theaded exhaust port

- Gauge port

More information

Details

POWER GENEX - Automatic Valve Accessories

Associated Trend items

Smart valve positioner

SS2/SS2S IP66 Ex ia IIC T6, SS3/SS3S Ex d IIC T6, SS5 fail freeze

POWER-GENEX positioner range covers all valve control applications. SS2 positioner is suitable for any type of valve and especially thanks to his compacts configuration to small size valves. The SS3 positioner is suitable to the environment require a flameproof enclosure with Ex d IIC T6 protection. SS5 The positioner is suitable for applications requiring the lock in po...

More information

Explosion proof valve position monitor with integrated solenoid

POWER-GENEX propose an explosion-proof Ex d IIC T5 / T6 valve position monitor providing an integrating a single or double acting solenoid, up to four contacts switches, a manual operation by push button, dome indicator all this features with a single product in a single housing. The LSB-7000 are suitable for quarter turn or linear valve on/off automation, it is available with aluminum or 316 stainless steel body and with a wide range of options :

- 4-20 mA position feedback - Up to 4 cable entries, size 3/4, 1/2, M20, M25 - P&F Pepperl+Fuchs NJ2-V3N, NJ2-12GK-SN, NBB3-V3-Z4 sensors - AUTONICS PSN17-5D NPN or PNP sensors - XT-90 sensor, MS-20 and MS-100 sensors - GO Switch model 35 and more ...

More information

Smart cylinder positioner / Peumatic power cylinder

The POWER-GENEX cylinder positioner are designed to operate any type of valve such as gate valve, damper, louver. POWER-GENEX cylinder positioners can be delivered fully assembled with the cylinder or supplied as a kit ready to be installed on an existing cylinder. Our cylinder positioners allow varied configurations with a wide range of cylinder bore size from DN40 to DN320 and strokes up to 1000 mm (others on request). To meet any kind of application a wide range of options are available :

- Fail freeze in case of signal failure - Fail freeze in case of pressure failure - Positioner remote mount - HART, Profibus PA, Foundation Fieldbus communication - Position feedback (limit switches, 4-20mA output ...) - Pneumatic accumulator

More information

Compare

Remove all

Compare up to 10 products