#Product Trends
Seamlessly Switch Between Two SSI Encoders with IF11
IF11 is designed for contactless (non mechanical), bounce-free switching between two SSI encoders and one SSI Master unit.
The switching operation is under control of a remote signal (HTL, 24 V). Moreover, there is an automatic internal synchronization to the next SSI signal pause, avoiding fragmented SSI telegrams and wrong information while commutation is in progress.
Typical applications can be found in handling and conveyor technology, where one Master unit must evaluate the signals of two independent SSI encoders for summing or differential information. We can find applications also in drives and automation, such as automatic roll change “on the fly” or redundant systems using several encoders for safety requirements.
IF11 uses a narrow and space-saving plastic housing, suitable for DIN rail mounting (according to IEC/EN 60715). Two LEDs are mounted on the front panel for easy diagnostics.
Technical Specifications
Power supply Input voltage: 12...30 VDC
Protection circuit: reverse polarity protection
Ripple: ≤10 % at 24 VDC
Consumption: approx. 50 mA (unloaded)
Connections: screw terminals, 1.5 mm²/ AWG 16
Encoder supply Number of outputs: 2
Output voltage: corresponds to the power supply voltage
minus approx. 2 V
Output current: 2 x 125 mA
Protection circuit: short circuit proof
Connections: screw terminals, 1.5 mm²/ AWG 16
SSI inputs Number of inputs: 2
Signal levels: RS422
Frequency range: min. 100 kHz ... max. 1 MHz
Connections: screw terminals, 1.5 mm²/ AWG 16
Control input Signal level: HTL, 24 V
Function: switchover for SSI encoder
Connections: screw terminals, 1.5 mm²/ AWG 16
SSI output Number of outputs: 1
Signal levels: RS422
Connections: screw terminals, 1.5 mm²/ AWG 16
Processing data Delay time: output <----> input: 100 ns
SSI interval time: min. 25 μs
Propagation delay: -6V... + 6V
Display elements Green LED: ready for operation
Yellow LED: switching state of the encdoer switch
Housing Material: plastic
Mounting: 35 mm top hat rail (according to EN 60715)
Dimensions (W x H x D): 22.5 x 121 x 112 mm
Protection class: IP20
Weight: approx. 100 g
Ambient Temperature Operation: 0 °C ... +45 °C / +32 ... +113 °F (not
condensing)
Storage: -25 °C ... +70 °C / -13 ... +158 °F (not
condensing)