White Passive OLED Matrix has TFT treatment and LED backlighting.

128x64 White Passive OLED Matrix

Microtips Technology is excited to announce our 128x64 white passive matrix OLED, with polarizer display. We are also excited to be in partnership with Raystar Optronics, Inc. Our new 128x64 OLED passive matrix display has a organic layer and strips of cathode and anode, which is great for audio, automobiles, meters, industrial app etc.. Not mentioning the COG display type. The driving voltage is 3.0Volts, there is no touch panel on this particular model, but can be customize if needs be, this display type COG. Pin 11 can either use for I2C, 3-wire SPI, 4-wire SPI , 8-bit 68xx parallel and 8bit parallel

Operating temperature of -40 ~ 80 degrees Celsius and a storage temperature of -40 ~ 80 degrees Celsius. As an active area of 21.738x10.858mm which is pretty great for a 128x64 inches display, the viewing direction is define by the rubbing direction of its TFT surface treatment, furthermore the grayscale inversion is at this direction as well. However the optimal viewing directions for human view is normally where the color does not change to grayscale inversion and this would be the opposite site of the specified viewing direction in the specification above.

The lifetime on this display 50,000, or other-words the half-life Time of these led chips brightness decreases to 50% than original brightness, base on Ta 25+- 2 degrees Celsius. This LCD display has 21 LEDs, with a 9.9v typical. The contrast ratio of 128x64 inch panel is 2000:1 with response time at 10 Microsecond. We have also start developing Flexible and transparency OLEDs display and will be feature in our next news letter, stay tune for more and exciting small displays.

Part# REX012864DWPP3N00000

DOT Matrix 128x64

Overall Area 26.7x19.26x1.65mm

Active Area 21.738x10.858mm

Dot pitch 0.17 x 0.17mm

Backlight Type LED

Contrast Ratio 2000:1

Duty 1/64

Temp ST: -40~80°C, OP: -40~70°C