#Product Trends
NEW: powder sampler by ProSys Sampling Systems Limited
Extracts a representative powder sample from pack-off booths, drop chutes and hoppers.
Can be either manually or automatically operated.
Operation
The auger is run in reverse to clean the sampler of any powder.
The auger is then run in a forward direction, this pushes the powder towards the sample outlet.
When the sample reaches the sample outlet it falls by gravity into the sample bottle.
The auger is run in reverse to ensure that any powder residue is removed from the sampler prior to shutting down.
Features
All contact parts are 316L s.s. or Hastelloy® C22 with PTFE or Kalrez® Elastomers.
PTFE Stuffing Box for manual sampler
Borosilicate sample bottle with ISO GL 45 connection
Finish: Internal Polish 0.25Ra, External Polish 0.5Ra
Options
A Sampler Carousel can be used to take discrete or composite samples at set intervals and each sample can be bottled separately.
Manually or automatically controlled.
A Quick Disconnect Sampler allows the operator to remove the screw between batch runs or at regular intervals for cleaning.
Containment of the sample bottle using a cabinet/glovebox.
Sample bottle connection can be machined to suit customer supplied bottle.
Nitrogen Purge/Solvent Flush Valve can be fitted.