Auto parts industry: vertical drilling automatic balancing machine

vertical drilling automatic balancing machine

Auto parts industry: vertical drilling automatic balancing machine

With the rapid development of the automobile manufacturing industry and the transportation industry, the requirements for the performance indicators of products are becoming higher and higher, especially the balancing of the rotating parts of the automobile is attracting more and more attention from the domestic supporting manufacturers. Full automation has gradually penetrated into our daily life, and the core components of the full automation device need to be tested by the dynamic balancing machine; Where there is rotation, there is balancing, when there is center mass deviation of the rotating parts, high-speed rotation will cause vibration and noise, resulting in failure and accidents; To provide a unbalance comprehensive solution, this is what Jianping has been doing.

The balancing method for original rotor or disc-shaped workpiece is to stop the machine first and then conduct dynamic unbalance correction to the workpiece when the violent vibration occurs, that is, off-line unbalance correction. With the development of dynamic balancing technology, automatic balancing technology has given rise to people’s concern, and has achieved certain results. JP vertical drilling automatic balancing machine is suitable for dynamic unbalance correction of flywheel, clutch, pulley, flange, flywheel and other disc-shaped auto parts with a center hole or shaft.

The main functions of this single-station vertical drilling automatic balancing machine are as follows:

1.Can do single-plane balancing, axial and radial drilling, quick changeover, parametric adjustment, simple operation, strong compatibility;

2.Can perform offline automatic balancing or online automatic line for automatic production, can be matched with MES system, to achieve data traceability;

3.Based on rotor quality difference, the equipment is divided into 5kg class 35Kg class and 150Kg class;

4.Weight removal features: the drilling area is limited (non-correction process holes, drilling circumference is not continuous) or not limited (area no requirements), the position of each hole (radius, plane) and the drilling depth allowed by each hole are specified.

JP balancing machine, high precision, more intelligent.

Automatic measurement, automatic correction, automatic parameter optimization.

PLC HMI control

Easier operation

Welcome to consult JP to learn more about auto parts industry balancing machine.