Several suggestions help you Operate Impact Crushers much easily

1. Mobile Impact crusher plant unit number 21765 is suitable for crushing not only soft materials, but the materials with high hardness. The plate hammer of the jaw crusher in Qatar is fixed on the rotor adopting the machine clamping structure and it will have huge rotational inertia when rotating with the rotor. Compared with mini hammer crusher pc1000x800 , the rotor of the ZYS cone crusher price Philippines has bigger quantity of motion roller mill, so that it is suitable for crushing harder materials and the energy consumption is lower.

2. Impact crusher can effectively process materials with high moisture. When processing materials with high water content, the feeding chute and the impacting plate of the can be equipped with heating device in order to prevent the materials from bonding. There is no need to equip bottom screen plate to avoid blockage. However, mini hammer crusher cannot be equipped with heating device and must be equipped with bottom screening plate, so that the blockage possibility is increased.

3. Impact crusher can flexibly and conveniently adjust the discharging granularity and the adjusting ranges are wide. This crushing machine can adjust the discharging granularity through many methods, such as adjusting rotor speed or the gap between the impacting plate and the grinding chamber. However, mini hammer crusher can only adjust the discharging granularity by changing the bottom screen plate.

When stopping machines running, impact crusher should be according to the sequence of production flow chart, which is in contrary to the starting sequence: Feeder has to be stopped firstly, when materials in crusher is discharged completely, then main motor and final product conveying equipment system can be stopped. Materials should be fed continuously and evenly to prevent bigger material than required size and metal from being fed.

In the process of running, you should pay more attention to inspect lubricating system, adding or replacing the lubricating oil regularly. The temperature of rotor-bearing should be below 60 , the max temperature can not exceed 70; When the final product size is too big, we should stop to check the wear pattern of hammer and impact plate, the clearance between hammer and impact machine, sealing and dust collection in workshop should be done well.