SYST series tilt switch sensor with ZERO setting function

Dual axis , range optional , 0.1deg accuracy , 30Hz

This tilt switch is used to measure the change of the tilt angle of dual axis, the high voltage signal is output when the angle of the object being measured is smaller than the preset alarm angle , and the voltage magnitude is equal to the supply voltage. The low voltage signal is output when the angle of the object being measured is greater than the preset alarm angle, and the voltage magnitude is about zero volts . The zero setting button is used to set the horizontal zero reference point.

Key features

Measuring aixs : X, Y dual axis

Measuring range : optional

Output mode : switch output

IP protection : IP67

Shock resistance : >3500g

Frequency response : 30Hz

Measuring accuracy : ±0.1°

LED default alarm angle : X: 2° Y : 3°

Cross sensitivity : 3%

Resolution : 0.1°

Small volume : L100 X W53 XH30mm ( Customized )

Weight : 55g（without packing box）

Installation : 2 * M4 screws

Electrical parameters

Power supply : DC9-36V

Working current : 30 mA

Output loading : ≤ 500MA

Working temperature : -30 ~+ 70 ℃

Storage temperature: -30 ~+ 70 ℃

Working life: 80000 ~100000Hr