Data Logger

It’s a dig. in/dig. out device. 8/16 channel switch input and with RS485 and relay output.Input isolated from output. It could be connected with PLC, relays, coils etc. for automation control systems like in energy distribution, data center rooms, motor controls.

Specifications

Input: 8/16 channel switch or electrical level(1 means on, 0 means off)

Output data : RS485 and relay outputs (Optocoupler transistor output)

Isolation between input and output: 1500Vdc

Output interface : RS-485 bus. 1200m, ±15KV ESD protection;

Baudrate: 1200, 2400, 4800, 9600, 19.2k bps.

Refreshing period : 100 mS.

Quiescent power consumption : <750 mW (+24V).

Power supply : +24V or 220Vac

More information

Details

SHENZHEN SENSOR ELECTRONIC TECHNOLOGY Co., LTD.

Associated Trend items

Lightning protection

Special transducer applied in lightning protection industry

To ensure equipment can work safely and stably in thunderstorm season, metal oxide surge arresters are widely used in power system. And MOA (metal oxide surge arresters) will gradually aging under the high voltage in a long term. Traditional MOA state monitoring depends on artificial observation, it is not real time. Only when the MOA on the breakdown failure state, s...

More information

Hall Effect Current Sensor

CE-IZ09-TIP20-1.0 series Current Transducer is a device closed loop based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit.

The devices have strong anti-jamming ability and provide accurate electronic measurement of DC, AC or pulsed current. Features AC&DC monitoring, up to 200~500A Closed loop PCB Mount 100mA output Specification: Basic Accuracy: 1.0% Thermal Drift: 500 PPM/°C Operating Temperature: -40°C to +85°C Insulation Voltage: 6KVDC Supply Voltage: ±15~±24VDC Response ...

More information

Hall Effect Current Transducer

CE-IZ09-TIP01-1.0 series Current Transducer is two-closed loop based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit.

The devices have strong anti-jamming ability and provide accurate electronic measurement of DC, AC or pulsed current. Features AC&DC monitoring, up to 3~30A Two-closed loop PCB Mount ±4V output Specification: Basic Accuracy: 1.0% Thermal Drift: 500 PPM/°C Operating Temperature: -40°C to +85°C Insulation Voltage: 3KVDC Supply Voltage: ±15VDC Response Time:...

More information

Compare

Remove all

Compare up to 10 products