Add to favorites

#Product Trends

Industrial 4G Router TDD LTE High Speed for M2M project

Industrial 4G Router TDD LTE High Speed for M2M project

WL-R200 4G router series is a reliable and cost-effective industrial 4G router with 2 port 10/100Base-T(X) and 1 SIM card slot. Users can set up the network environment to fulfill demands of various applications rapidly by dialing up cellular modems. It supports HTTPS and IP filter for security control. Further, WL-R200 Router can operate in a wide temperature range, -20~70°C. Therefore, it is one of the best solutions for applications of Internet communication.

Basic Feature

1. Industrial robust design and compact metal housing

2. High data speed via 4G LTE TDD and FDD, HSPA+ 3.5G network,

3. DIN Rail Mount optonal

4. Strong electromagnetic interference Resistance

5. Heat endurance and radiation ability

6. Built-in watch dog, Multi-link detection

7. 802.11b/g/n Wi-Fi support, 150Mbps data rate

8. WAN port support PPPoE, static IP, DHCP client.

9. Always online, reboot automatically if disconnected to ensure continual connection

10. Support APN and VPDN wireless private network access in

11. LCP/ICMP/flow/heartbeat check, ensure network usability

12. Web/CLI/SSH/Management platform support, easy configure

13. SNMP network management, NTP support

14. Local & remote management (configuration, status, upgrade firmware)

15. Supports DHCP Server

16. Supports DNS proxy and Dynamic DNS (DDNS)

17. Supports timing operation

18. Supports LED status indication

19. Shock and vibration resistant

Specification

1. Supports Mobile Network

FDD: 800/900/1800/1900/2100/21\600MHz

HSPA+ 3G 800/850/900/1900/2100M

EDGE/GPRS 850/900/1900/2100MHz

2. Ethernet Standard

IEEE 802.3

IEEE 802.3u

3. Interface

2×10/100Mb LAN (1XLAN, 1xWAN)

1× RS-232 console port optional (RJ45)

2× SMA-K antenna interface

2× Standard SIM/R-UIM interface

1× Standard DC power interface

4. LED Instruction

Net

WLAN

WAN

LAN

5. Route Protocol

Static route

RIPv2 / OSPF dynamic route

6. Power Supply

7.5 ~ 32VDC

7. WiFi

Standard: IEEE 802.11n

WEP, WPA and WPA2 encryption

Standard 150Mbps, 300Mbps optional

AP, Client, station, bridge mode support

8. Firewall & Filter

IP packet / Domain / MAC filter

NAT

DMZ

9. VPN(Optional)

IPSec

PPTP/L2TP client

GRE/IPIP

10. Power Consumption

Idle: 80mA@+12VDC

Single Module Communications: 320mA@+12VDC

11. Other

Dimension: 103mm x 73.5mm x 25.5mm (not including antenna)

Weight: 300g

Operation temperature: -30 + 70℃

Store temperature: -40~ + 85℃

Related humidity: <95% (non-condensing)

Details

  • Shenzhen Wlink Technology Co., LTD