#Product Trends
Temperature sensors for the chemical industry
Temperature sensors from the Simex offer can be used in various industries. A wide range of solutions often makes measuring the entire process possible
SCR104
Head resistance thermometer (RTD - Pt100, Ni100, Pt500, Pt1000) designed for temperature measurement of pipelines, tanks, and all kinds of machines and devices. The sensor consists of an aluminum connection head, a stainless steel sheath and a thread connection for the installation of the sensor:
measuring range: -50 ... 550°C
operating temperature of aluminum connection head max. 150°C
sheath made of stainless steel, diameter 4 ... 22 mm
reinforced transitional sensor thermowell
possibility of mounting a 4…20 mA or 0…10V measuring transducer
sensor available with local temperature display (DANW head)
The production process of the sensor with a replaceable measuring insert makes it possible to replace the element without the need to disassemble the entire sheath. Separating the head from the process connection and, consequently, from the temperature source allows the sensor to operate at higher temperatures.
SCT600
Thermoelectric sensor in a ceramic protection tube (TC - K, N, S, R, B) designed to measure the temperature in industrial furnaces, dryers, flue gas channels, etc. The sensor consists of a replaceable measuring insert, a ceramic tube and an aluminum head, in which it is possible to install a programmable temperature transducer with an output signal of 4 ... 20 mA or 0 ... 10V.
thermoelectric sensor in a ceramic tube
measuring range: up to +1800°C depending on the selected thermocouple
operating temperature of aluminum connection head max. 150°C
possibility of mounting the measuring transducer 4...20 mA or 0...10V
tube material: C610 (60% Al2O3), C799 (99,7% Al2O3) or C530 (75% Al2O3)
installation by means of threaded fittings and flanges
SCT300
The mineral insulated thermocouple (TC - J, K, N), thanks to its specific design the sensor is insensitive to bending and shape change. SCT300 is designed for installation in hard-to-reach places. On its basis, it is possible to implement a multi-point thermocouple system, i.e. several / a dozen or so thermocouples of different lengths connected in one housing.
mineral insulated thermoelectric sensor
measuring range: -40...+1200°C
accurate measurement and short reaction time to temperature changes
small dimensions enable work in hard-to-reach places
resistance to vibrations and the possibility of bending
thermowell made of nickel alloys (Inconel 600)
Drilled thermowells
They are used to protect the sensor against harsh environmental conditions. They can be made of acid-resistant steel, e.g. 1.4541, 1.4571 or 1.4404. The entire element is made of a homogeneous material with deep drilling along the entire length. Any temperature sensor adapted to the needs of the application can be mounted in the thermowell.
