NEW: DC servo controller by Smart Motor Devices

BMSD-Servo operates with DC brush servo motor with encoder with 500pps. Controller has two operation modes:

- manual mode;

- controller mode: standalone and "direct control" (via USB interface).

In manual mode it is possible to adjust speed by internal potentiometer or external analog signal 0...5VDC, acceleration/deceleration by internal potentiometer and to control direction of rotation. In controller mode it is possible control speed, acceleration/deceleration and position (relative and absolute mode).

Controlling of brush servo motor with encoder via USB interface

Program can be loaded to EEPROM of the unit or to operational buffer. Also BMSD-Servo can be controlled by commands in real time.

Technical parameters:

Voltage: 12 - 48VDC

Maximum motor voltage: 0.98Usup

Maximum operation motor current: 20Amp

Current protection: 30Amp

Maximum acceleration and deceleration setting, V/sec: 3Usup

Minimum acceleration and deceleration setting, V/sec: Usup/8

Opportunities of BMSD-Servo controlling via USB interface:

speed adjusting;

direction control;

moving the specified number of encoder pulses or moving to specified coordinate;

acceleration;

deceleration;

controlling two outputs "open-collector" type;

two inputs status analysis;

"home" position searching.