Sonacme New Listing Ptroducts

High and Low Temperature Test Chamber

High and low temperature test chamber, customized expansion force acquisition module placement device. It is used to simulate products under the combined conditions of temperature and humidity in climate environment (high and low temperature operation, storage, temperature cycle, high temperature and high humidity, low temperature and low humidity, dew test, etc.). It is suitable for aerospace products, information electronic instruments, materials, electrical, electronic products, all kinds of electronic components in high and low temperature to test its various performance indicators.

Temperature range: -20℃~100℃

External dimensions: W2350mmD1750mm*H2100mm

Internal dimensions: W1400mm*D650mm*H1800mm

Volume: 1638L

heating system: 1. It adopts high quality explosion-proof alloy heating tube, and it can rapid heat exchange

2. It uses intelligent microcomputer PID+SSR/SCR can automatically forward and reverse two-way synchronous output, containing advanced slope control logic. It can set the temperature synchronization slope, stable and accurate control precision

Door (with explosion-proof function): 1. Door size :1500*1900mm, door can open left and right sides

2. Air tightness treatment scheme, designed with double sealing rubber strip

3. Second-level explosion-proof door: The door can be deformed after explosion, but it can be opened and closed normally

Expansion force acquisition module placement device: Reserved expansion force acquisition module placement position length : (W)350 mm*(D)200 mm*(H) 70mm

Explosion-proof chain: The left and right sides of the chamber door are equipped with medium 10mm explosion-proof chain

Air cooling circulation system: parallel air design

Temperature sensor: two temperature sensors(one is on air outlet and another is on air inlet)

Temperature probe: the temperature probe of cold plate products in the oven has 24 channels, and the female end of each 12 channels of inlet and return water is fixed on the equipment panel

Pressure balancing device (pressure relief port) : 1. 2 pressure relief ports installed on the top of the equipment.

2.Size :W250mmXD250mm.

3.Operating pressure :0104Mpa

Dust proof design of the fan: When the fan is running, dust is prevented from entering the chamber, and the air filter is added to seal it

Compressor anti-frosting device: long time low temperature operation compressor frosting, install anti-frosting device