The new SONEL illuminance meter family - more accurate with new functionality

The external probe used in the meter, has build-in a light-sensitive silicon photodiode and the spectral sensitivity filter. Photodiode is corrected to the cosine curve and is placed in external probe combined with the control panel with 1.5 m length cable. LXP-10B/A also allows for wireless data transfer to a PC via an optional radio adapter OR-1. The most important features of new LXP family are:

- Measurement resolution LXP-2 – 0.1 lx (0.01 fc), LXP-10B – 0.01 lx (0.001 fc), LXP-10A - 0,001 lx (0,0001 fc)

- High accuracy and fast response

- Data-hold function for holding measuring values

- Automatic zeroing

- No need for correction factors calculating for different light sources thanks to a very good fit spectral sensitivity guaranteeing the correct measurement of intensity of the illumination regardless of the nature of radiation

- Peak-hold function for tracing the peak signal of light pulse with duration longer than 0.1 s (0.4 s for LXP-2) and less than 1 s

- Capable of selecting measuring mode in Lux or FC scale alternatively

- Auto power off (5,10 or 15minutes) or disable AUTO power off

- Maximum and minimum measurements

- Relative reading

- Easy to read large backlit display

- USB output connect with PC

- Data transmission via radio connection using an optional adapter OR-1 (only LXP-10B, LXP-10A)

- four - LXP-2, five - LXP-10B and six measurement ranges - LXP-10A

- Built-in memory - 99 result for LXP-2 or 999 for LXP-10A and LXP-10B, with can be checked in the meter or PC

- 16000 values records data logger (traceable only in PC)99 values in memory that could be read on the meter and PC

- 16000 values records data-logger