How to identify the advantages and disadvantages of automatic mask packaging machine

How to identify the advantages and disadvantages of automatic mask packaging machine

Before, masks are a daily necessity for everyone. You must wear a mask when you go out. Therefore, it is particularly important to keep the mask clean. Keeping the mask intact and clean requires packaging. Automatic mask packaging machine can solve these problems well. The quality of the mask packaging machine has a great influence on the packaging. Therefore, when selecting the mask packaging machine, you must know how to identify it. The specific methods are as follows:

Mask packing machine

1. To ensure the tightness, there must be no air leakage.

2. The air in the packaging bag after the mask is packaged. If it is packed, it means that there is too much air and the exhaust function is not perfect. It is not a qualified mask packaging machine.

3. Whether the packaging machine can be cut after it is packaged, and the packaging machine that can not cut the packaging bag is a rogue.

4. The material of the packaging machine, medical grade masks have high requirements on the environment, which is also a very high requirement on the packaging machine. First of all, it is necessary to ensure that the packaging machine will not rust and will not be easily corroded. This will require 304. The grade of stainless steel is used to make the packaging machine. Such a packaging machine is the most suitable for medical grade.

5. The stability of the packaging machine. An unstable packaging machine is a trick to swindle money. The really good mask packaging machine has an average material thickness of 5 wires. The overall structure is stable and beautiful.

2：Mask packing machine maintenance

Maintenance of the electrical part of the mask packing machine:

1. The operator of the mask packing machine should regularly check whether the thread ends of each joint are loose before starting;

2. Dust and other fine particles may also affect the function of the packaging machine. The photoelectric switch and the proximity switch's probe are prone to make mistakes when they are dusty, so you should always check and do the cleaning work.

3. The detailed parts are also the focus of mechanical cleaning. For example, regularly clean the surface of the horizontal seal electric slip ring with soft gauze dipped in alcohol to remove the toner on the surface.

4. Some parts of the mask packaging machine cannot be changed arbitrarily. Non-professionals are not allowed to open the electrical part. The parameters or programs of the frequency converter, microcomputer and other control elements have been set. Random changes will cause the system to malfunction and the machine cannot work normally.

Mask packing machine

Lubrication treatment of mask packing machine:

1. The rolling bearing is a part of the machine that is worn more seriously, so each rolling bearing should be filled with grease once with a grease gun about two months;

2. Different types of lubricants are different, such as the bushing on the rubber roller of the packaging film, and the bushing at the front sprocket of the feeding conveyor should be filled with 40 # mechanical oil in a timely manner;

3. The weeping and slipping of the chain is common. It is relatively simple that each sprocket chain should be dripped in time with mechanical oil with a dynamic viscosity greater than 40 #;

4. The clutch is the key position for starting the mask packaging machine. The clutch part should be lubricated with grease in a timely manner. The average cycle is generally limited to two months.

The above are the two points that need to be paid attention to for daily maintenance of the mask packaging machine to ensure the normal operation of the packaging machine.

3：Development trend analysis

The development trend of mask packaging machine equipment:

1. The technical content needs to be improved. Some domestic packaging machinery products have low technical content, and foreign countries have applied many advanced technologies to packaging machinery, such as remote control technology (including monitoring), stepper motor technology, automatic flexibility Compensation technology, laser cutting technology, information processing technology, etc.

Mask packing machine

2. The market tends to be monopolized. Except for corrugated box packaging machinery and some small packaging machinery that have certain scale and advantages, other packaging machinery has almost no system and scale, especially some complete packaging production lines with large demand in the market. The market is monopolized by several large packaging machinery enterprises (groups).

3. Specialization in the production of equipment parts and components, the international packaging industry attaches great importance to improving the general processing capabilities of mask packaging machinery processing and the entire packaging system, so the specialization of the production of packaging machinery parts is an inevitable trend of development. Production, but produced by some general standard parts factory, some special parts are produced by highly specialized manufacturers, the really famous packaging machinery factory will probably be an assembly factory. The product develops into multifunctional and single, high-speed polarization.