Analog Force Gauge | NK

Introduction:

The NK series with compact size,high accuracy,they are easy to operate and handy to carry out,and can show the unit of newton and kilogram at the same time.The PEAK/TRACK knob of it can switch between the peak value load test and the continuous load test.They are excellent products which can take the place of the old style force gauges, and widely applied in electric,high & low voltage electric appliance, hardware,automobile parts,lighter and ignition system,light industry, mechanical,textile and so on industries for test of pull or push load test insertion force or pull and destructive experiment.Please reading the manual carefully before using this instrument.

Preparation before test：

Choose appropriate joint clamps and install it on the gauge before test.

(1)Pull test

Choose pull clamp and install it on the central stick of marked [PULL].

(2)Push test

Choose push clamp and install it on the central stick of marked [PUSH].

(3)Use of prolong stick

When it isn''t possible to touch tested thing, use prolong stick to install clamp.

NOTE:

When testing, tested thing and gauge must be on the same straight line, if not, it isn''t possible to test right value of load.