The safe operation of robot water jet system

The safe operation of robot water jet system

At present, the water jet technology is becoming more and more mature, and its safety is much higher than that of other equipment. However, due to improper use, operation, maintenance and other factors, there will also be safety problems, so it is necessary to pay attention to the safe operation of equipment. In addition to complying with these regulations, users must be aware of the relevant national, local and enterprise safety regulations.

High pressure water jet cutting machine is a high-energy cutting tool, which can cut most dense or hard materials. Do not touch or expose to high-pressure water flow. High pressure water will penetrate all parts of the human body. Liquid streams and materials ejected under extreme pressure can cause serious personal injury.

Users expect to know how to correctly and safely use common installation and disassembly waterjet tools and safely operate ultra-high voltage equipment. Before that, we should first do our homework on the performance characteristics and optional components of the HP intensifier pump of the water jet, so as to achieve half the result with half the effort, so as to have a better understanding of the conventional safety.

The safe operation of robot water jet system

1.The powerful water flow of the water jet cutting machine can penetrate almost all materials, so avoid contacting the water jet. Theabrasivewaterjetcutting machine sprays a mixture of water and abrasive. If you touch it with skin, it is likely to penetrate the skin and cause serious infection.

2.People who have not been specially trained are not allowed to operate the water jet cutting system.

3.Wear safety glasses when operating or approaching the machine.

4.Clean and inspect the equipment frequently and deal with all problems immediately. For example, the hydraulic oil of the high-pressureintensifierpump must be replaced in time after use (observe its quality, which can be evaluated by appearance and smell or accurately evaluated by the oil supplier) or after being polluted by water.

5.All operators and maintenance personnel of water jet cutting equipment or operators near the equipment shall comply with the following safety precautions and applicable factory safety precautions.

6.peration and maintenance must be carried out by personnel trained by the company and certified.

7.Operators shall always implement safety requirements to avoid possible personal injury and unnecessary equipment shutdown.

8.The operation responsibility of ultra-high pressure intensifier pump must be clearly defined and observed to ensure that there is no confusion such as unclear responsibility in the safe area.

9.Ensure that all protective devices, shields or covers, etc. are properly placed on the relevant equipment at all times.

10.Ensure that the operation area around the waterjet equipment is clean and free of any sundries and oil spills.

11.Wear goggles and ear protectors when operating or working near the equipment.

12.The user can start the ultra-high pressure pump only when the ultra-high pressure pump is in good condition.

13.If there are any changes affecting the safety of the ultra-high pressure pump, the operator must report to the owner immediately.

Before operation and maintenance of robot waterjet cutting system, the water jet high-pressure intensifier pump must be operated and repaired according to the specified requirements. In daily work, always follow the tips of this operation and pay attention to safe operation, maintenance of waterjet spare parts.