Efficient Quality Assurance Systems in AGME riveting machines

- CAC Constant Height Control

- AC-1 Quality Assurance System

- AC-2 Quality Assurance System

The riveting process quality can be controlled by simple systems as the CAC, or by more sophisticated ones like the AC-1 or AC-2.

The CAC system controls the final riveted head height so it is possible to rivet equal parts placed at different heights.

The AC-1 and AC-2 systems can monitor and control the riveting process by detecting and evaluating the following parameters:

- Rivet presence

- Applied pressure

- Riveting tool wear

- Riveting head height

In the AC-1 system, the riveting head carries out the parameters measure from a reference “0” point in the head resting position. This system is valid for short rivets assembling.

The AC-2 system consists of a floating device on the riveting head which touches the parts that must be assembled and enables the machine to determine the reference surface “0”. Then the parameters can be measured (pressure, stroke, etc) during the subsequent riveting process. This is the best quality presence system for very long spindles riveting.