Demagnetizers installed in automated processes with parts handling with robot, “D-RL” serie

Demagnetization of single parts

Simultaneous demagnetization of several parts

Demagnetization of parts placed in washing or transport containers

The Electronic impulse demagnetizers, installed in automated processes with part transfer with robots/mechanical arms, can be designed to be adapted for different configurations. Possibility of demagnetizing the single part, or more parts at the same time. These models can also be designed to demagnetize the parts placed inside washing or transport baskets. Depending on the parts to be demagnetized, the cycle time and the type of robot clamps, it is possible to design made-to-measure solutions according to the customer''s requirements. Easy operation thanks to the exchange of signals between the demagnetization electronic control units and the line.

Example of operation:

The demagnetization coil is free (no part presence) => enabling signal for part loading;

The robot positions the part on the demagnetization coil;

The electronic detects the presence of the part and releases the demagnetization impulse;

The electronic provides the process end signal => enabling signal for part unloading;

The robot unloads the demagnetized part and the process continues

The communication signals between the electronic and the line can vary according to the specific application.

Characteristics and Advantages:

Demagnetization of the single part or more parts together

Demagnetization of parts placed in a container

High productivity

Minimum energy consumption (< 150 W)

Easy installation

Almost zero maintenance

Technical data required for a quote:

Part geometry

Minimum and maximum part dimensions

Demagnetization of the single part or parts placed in a container

Dimensions of the container (L x W x H)

Material of the container

Positioning of the parts inside the container

The cycle time (parts/hour);

Working hours/day

Description of the robot process

Description of the type of clamping

Minimum residual magnetism required

Applications:

All manufacturers