This heavy duty strain sensor features a specially developed measurement principle and comes with integrated temperature compensation and stress-free measurement. The EnDAT bi-directional digital data interface allows the sensor to deliver information such as of temperature, type label, and internal sensor diagnostics. It also can store application-specific informatio...
SMP858-DST Monosilicon pressure transmitter is a high performance pressure transmitter with international leading technology meticulously designed by LEEG instrument, using the world's most advanced sensor technology and patent encapsulation technology. Features • Measuring range: 10kPa-1MPa • Output signal: 4-20mA, 4~20mA/HART, customer • Reference accuracy: ±0.1...
The new 52A (analogue) and 52D (digital) differential pressure series is very compact (13 mm x 8 mm) and designed for direct integration into products by means of O-ring manifold assembly. Thanks to the simple sensor design with a small number of components, the sensor is very attractively priced. Measurement ranges from 2 mbar up to 7 bar and supply voltages from 2.7 to...
Thanks to its aluminium housing, M8 connector and one-touch connectors, Pewatron’s new series is very robust and has an IP67 rating. Internally, the sensor is built around a MEMS chip that operates based on the calorimetric principle. Both the flow and the direction of flow can be detected. The sensor is calibrated with air as standard. On request, the sensor can also be...
This multispectrum infrared flame detector has third-party certification to detect a 30-inch (76 cm) hydrogen plume fire at 125 feet (38 meters) on-axis in as little as three seconds. In addition to being certified SIL 2-capable and performance-certified to FM 3260 for hydrogen fires, the X3302 is now FM Approved to detect methanol, methane and syngas fires, which con...
Working liquids in liquid thermometers are used to sense temperature changes, So there are three requirements for it: First, the temperature range of liquids should be wide, that is to say, its freezing point should be low and its boiling point should be high. Second, the volume expansion coefficient should be large. Third, liquids should be pure, not stained with glass,...
Clean and disinfect probe thermometers before and after each use, during the use the depth of insertion of probes for different foods is different. Wait at least 15 seconds before the thermometer reads the number after inserting food. The best way to read meat temperature is to read it at least twice and insert it in different places, because the temperature of differen...
Probe thermometers can be calibrated by freezing point method or boiling point method. Fill the large glass with crushed ice. Add clean water until the glass is filled and stirred. The probe thermometer is inserted into the ice water and the induction area is completely immersed. Wait 30 second. Do not let the probe touch the bottom or around the glass. Probes must be i...
In 1593, Galileo invented the first thermometer. In 1654, Ferdinand made the first alcohol thermometer for each other. In 1659, Brio produced the first mercury thermometer. In 1714, Warrenheit set the Fahrenheit temperature; Lemuel set the formula temperature. In 1742, Lemuir set the temperature at Celsius. With the development of science and technology a...
Model 6991 S-type force transducer from BCM SENSOR is specially designed for applications in which overload may occur much higher (e.g., 5 times) than the rated capacity of a force transducer. As an S-type force transducer, the 6991 can measure either tension or compression forces, and it is widely used for material test and for process control. 6991 offers the be...
In recent years, with the importance of ocean development and application, great progress has been made in the exploitation of ocean water and ocean energy. However, there are still difficulties and unknown areas in the study of ocean water. The composition of seawater is quite complex, and the content of chemical elements varies greatly. It is a mixed solution with comp...
With the new GEMÜ C12A electrical position indicator, GEMÜ is offering a customer-oriented solution for intelligent process automation in the chemical and semiconductor industry. The position indicator is available as a mounting part for the pneumatically operated GEMÜ C50 iComLine diaphragm globe valves and is particularly suitable for automation in wet process equip...
YUDEN-TECH since its inception in 1993 the company has been at the forefront of measurement, has own independent professional research and development and manufacturing team, keep focus on measurement technology, so far, we already have a number of patents, such as the fast connection seat of the transmitter, the panel display and the calibration method of humidity tra...
BCM SENSOR recently has launched a new developed diaphragm-type force transducer, model 119B, for either tension force or compression force measurement. To realize this, the 119B transducer possesses two threads at its top and bottom, respectively, which provide connections when this transducer is installed for application. Thanks to the diaphragm-type design, the 119...
A new in-line strain gauge amplifier from Mantracourt Electronics is set to streamline the calibration of a sensor thanks to its digital potentiometers and extremely simple and intuitive toolkit. Designed to convert strain gauge or load cell inputs into a 4-20 mA output, it provides more filtering than the existing embedded strain gauge amplifier range (ICA), and due...
SMP858-NST Direct mounted diaphragm seal pressure transmitter are widely used in petrochemical, chemical, power, steel, cement and papermaking. Optional isolation diaphragm with Tantalum, and Hastelloy C isolation diaphragm for corrosive media.High performance, high accuracy and high reliability. Main parameters Pressure types: Differential pressure Measuring range...
One of the leading companies in the concrete production market in Peru needed to control cement levels in silos for inventory and process control of 11 meters height and 3,45 meters diameter. The environment was very dusty, especially after the filling, which makes it difficult to measure. It was also important to visualize the volumes of the silos into individual displa...
In industrial measurement, the accuracy grade is usually used to express the accuracy of the instrument. The accuracy grade is to remove the'+'and'%' numbers from the maximum reference error. The accuracy grade is one of the important indexes to measure the quality of the instrument. The accuracy grade of bimetallic thermometer is divided by the percentage of its allowa...
Bimetallic thermometer is a kind of thermosensitive element which is made of hot bimetallic sheet wound into screw thread and installed in protective sleeve. One end is fixed (fixed end), the other end (free end) is connected to a thin shaft, and the axle end is equipped with a pointer.. When the temperature changes, the free end of the temperature sensor rotates immedi...
Flange diaphragm type pressure transmitters are widely used in petroleum, chemical, electric power, food, paper, municipal engineering and other industries. SMP858-TST provides accurate level and density measurements on a wide range of vessels, especially for the medium which are high temperature, viscous, slurry, etc. Features Measuring range: -100kPa ~ 1MPa Output...
Leveling Control of DP500 Agricultural Machinery for Horizontal Angle of Automatic Running Agricultural Machinery Control. The product is composed of CNC display and dynamic inclination sensor. On the monitor Easily set the threshold of adjusting angle, you can set the speed and amplitude of callback, so as to be able to Hydraulic adjusting speed suitable for each machin...
Our UWT area sales manager for the regions Eastern Europe / CIS and Baltic region was on the way to meet the Russian subsidiary UWT RUS Level Measurement, looking forward to exciting and eventful days! During the week, 19 plants were visited to introduce the company and to generate solutions for level measurement challenges. UWT GmbH - the partner for simple and reliabl...
Highly convincing across the board: Thanks to their continuous, homogenous light band, wenglor’s new retro-reflex sensors can also reliably detect objects with irregular or asymmetrical shapes, for example in the field of intralogistics. With three models for different light band heights, high levels of user-friendliness and special logistics functions, wenglor provides ...
The company says that standard inductive sensors can only detect non-ferrous metal targets at reduced switching distances. This is because reduction factors can vary from one metal to another. It’s claimed the reduction factor 1 sensors unify switching distances for all types of metals. These sensors with IO-Link can be configured via a PLC while data control function...
The new T series marks the evolution of the leak testers for the industry. A touch of innovation that fosters man-machine interaction thanks to the innovative tempered glass touch capacitive panel and other technological innovations that make the range, the natural evolution of the previous M series, the new benchmark for testing and proof brought.
he smart solution for grinding wheel machines Heavy duty instrument, quick&Easy to useEasy Balancing Feature Grinding balancing with 2 or 3 counterweights Graphic interface with real time correction Balancing report
Shimadzu has been awarded two Red Dot Design Awards 2019 in the product design category for its new Nexera UHPLC series LC-40 and UV-1900 UV-Vis spectrophotometer. Already in 2013 and 2018, Red Dot Design Awards were dedicated to Shimadzu’s VESTA Vacuum and Pressurized Sintering Furnace, the AIM-9000 Infrared Microscope and the IRSpirit Fourier Transform Infrared Spectro...
Giropes, through the Giropes Solutions brand, is launching a new self-service terminal with a 10.1'' touch screen and a built-in PC to be able to manage all the actions of the weighing process without the need for a scale operator. The incorporation of a smaller screen than the GST3 provides a superior optimisation of the terminal’s internal space, reducing the size ...
While servomotors remain the gold standard for precision motion control in industrial machinery, the improved performance of stepper motors is making these lower-cost devices an increasingly attractive alternative for many applications. The key to these performance gains is the addition of rotation-measuring encoders, especially the new absolute multi-turn kit encoders f...
The CN7 is the pocket-size one. Compact and flexible the level limit in both metallic and non-metallic containers can be determined. The electrodes in the sensor form a capacitor. If the product comes into contact with the sensor, the capacitance changes and the electronics converts it into a switching signal. Smart versions for different media work with the integrate...
Our customer is a biomedical engineering company for 16 years, which is founded by a crowd of doctor. And HBOT is their main product. They keep on going to research and develop HBOT relevant testing and experiments, and pay a lot of attention for customer health and life. Till nowadays, they already gain many well-known quality certifications to prove their HBOT product...
eYc air velocity and temperature measuring solution execute via 4-20 mA output into the paperless recorder. Our client successfully gain the precise accurate measuring data to verify the product performance and adjust the indoor temperature by monitoring data situation of air flow and temperature to reach the heat dissipation effect, increase the living quality, and reac...
Benefit eYc THS88-C industrial grade high pressure dew point transmitter is embedded industrial grade anti-condensation sensor, and features high pressure with low humidity. It provides excellent performance such as 16 bar of bearable pressure, -60 to +60 dp℃ working range of dew point, ± 2 dp ℃ (at +25℃) ± (0.02%F.S/℃) linear accuracy, capable of temperature compen...
The CN7 is the pocket-size one. Compact and flexible the level limit in both metallic and non-metallic containers can be determined. The electrodes in the sensor form a capacitor. If the product comes into contact with the sensor, the capacitance changes and the electronics converts it into a switching signal. Smart versions for different media work with the integrated...
Unlike thermocouples or spot pyrometers, the A35sc allows you to measure thousands of temperature points across your target and get reliable data in seconds. Together with the kit’s lens choices and advanced analysis software, the A35sc kit is the most dependable temperature measurement solution for industrial and R&D labs. Thermal imaging cameras can be used for a wi...
Reliability, low maintenance and customer service. These are 3 main advantages. You too can discover our Sofraser process viscometer range. Increase productivity and efficiency. Full video: https://lnkd.in/ggakiDw Reynolds Polymer Technology #viscometer #polymer
