The NoisePen personal noise meter by Pulsar Instruments is the ideal tool to assess whether your employees are at risk of noise-induced hearing loss by exposure to excessive noise. Worn on the shoulder, this cable-free pre-programmable dosemeter enables measurement and monitoring of the noise levels an individual is exposed to throughout their working day or shift. T...
SPECTRO Analytical Instruments has introduced the eighth generation of its SPECTROMAXx with iCAL 2.0 ARC/SPARK OES Analyzer — improved with innovative new capabilities and advancements in performance to achieve fast, accurate elemental analysis precisely tuned for material control and foundry applications. The SPECTROMAXx may well be the industry’s leading OES line wi...
The NoiseScout noise monitoring system is designed for unattended monitoring of noise levels in environments such as construction sites and airports. It is a professional system that provides a wide range of configuration options. These now include Plug & Play interfaces to a weather station and a GPS receiver.
Introducing a portable battery tester, Gossen Metrawatt expands its lineup of measuring and test devices, which help professionals ensure the safe configuration and functioning of electrical equipment. The brand-new METRACELL BT Pro is a versatile solution for testing battery storage systems in DC voltage infrastructures. Above and beyond the required capacity tests, ...
The answer to the question how much an atomic force microscope (AFM) costs is always "it depends". The pricing of scanning probe microscopes is influenced by many factors, like the performance, capabilities and modes you expect from your instrument, which in turn determine the components and complexity of the technology employed.
Magnetostrictive sensors are utilized for all those applications, where the sensing of positions and speeds requires great reliability and high precision, particularly in the face of great distances. They are available in profile (TP1) and rod design (TH1), are also suitable for mounting directly in hydraulic cylinders and are deliverable for gauge lengths up to 4250 mm....
Regardless of which functional principle - in order to prove itself in everyday industrial life, an angle sensor should meet at least four important criteria: It must be mechanically robust, provide sufficient protection against environmental influences and can be installed both electrically and mechanically uncomplicated. Only the sum of these properties determines whet...
Open-loop current sensor develops on hall effect principle, it can measure DC, AC or pulse currents without insert loss. Specifications 1. Model No.: SCK18-300A.. SCK18-2000A 2. Window size (mm): 30 *40 3. Primary input current(Amps): 300-2000A 4. Working voltage (v): DC ±12V or ±15V 5. Output signal (v): DC ±4V or ±5V 6. Response time: less than 5μs 7. Overloa...
The GF77 is spectrally filtered to optimally visualize methane gas. Spectral targeting improves visualization, while also reducing false negatives from gases that absorb in other wavelengths. This innovative optical gas imaging camera also offers many unique and proven features, such as 1-Touch Level/Span. With a quick tap on the screen, 1-Touch Level/Span automatically ...
STPSYS05 is a non-invasive, easy-to-use and affordable system for measuring the thermal conductivity at the surface of a specimen. STPSYS05 advantages include: -affordable -non-invasive: all that is required is a smooth flat surface over the sensor area and sufficient specimen thickness below that surface. There is no need for specific specimen dimensions. -single...
The new 52A (analogue) and 52D (digital) differential pressure series is very compact (13 mm x 8 mm) and designed for direct integration into products by means of O-ring manifold assembly. Thanks to the simple sensor design with a small number of components, the sensor is very attractively priced. Measurement ranges from 2 mbar up to 7 bar and supply voltages from 2.7 to...
Working liquids in liquid thermometers are used to sense temperature changes, So there are three requirements for it: First, the temperature range of liquids should be wide, that is to say, its freezing point should be low and its boiling point should be high. Second, the volume expansion coefficient should be large. Third, liquids should be pure, not stained with glass,...
With the new GEMÜ C12A electrical position indicator, GEMÜ is offering a customer-oriented solution for intelligent process automation in the chemical and semiconductor industry. The position indicator is available as a mounting part for the pneumatically operated GEMÜ C50 iComLine diaphragm globe valves and is particularly suitable for automation in wet process equip...
Highly convincing across the board: Thanks to their continuous, homogenous light band, wenglor’s new retro-reflex sensors can also reliably detect objects with irregular or asymmetrical shapes, for example in the field of intralogistics. With three models for different light band heights, high levels of user-friendliness and special logistics functions, wenglor provides ...
In industrial measurement, the accuracy grade is usually used to express the accuracy of the instrument. The accuracy grade is to remove the'+'and'%' numbers from the maximum reference error. The accuracy grade is one of the important indexes to measure the quality of the instrument. The accuracy grade of bimetallic thermometer is divided by the percentage of its allowa...
Shimadzu has been awarded two Red Dot Design Awards 2019 in the product design category for its new Nexera UHPLC series LC-40 and UV-1900 UV-Vis spectrophotometer. Already in 2013 and 2018, Red Dot Design Awards were dedicated to Shimadzu’s VESTA Vacuum and Pressurized Sintering Furnace, the AIM-9000 Infrared Microscope and the IRSpirit Fourier Transform Infrared Spectro...
The CN7 is the pocket-size one. Compact and flexible the level limit in both metallic and non-metallic containers can be determined. The electrodes in the sensor form a capacitor. If the product comes into contact with the sensor, the capacitance changes and the electronics converts it into a switching signal. Smart versions for different media work with the integrate...
The CN7 is the pocket-size one. Compact and flexible the level limit in both metallic and non-metallic containers can be determined. The electrodes in the sensor form a capacitor. If the product comes into contact with the sensor, the capacitance changes and the electronics converts it into a switching signal. Smart versions for different media work with the integrated...
1.Pressure gauges must be placed vertically during prevention and control: wrench should be used to tighten the installation, do not screw the case with the hand, because this will cause the surface to be damaged. Don't let it collide during transportation to avoid damage. 2.When using pressure gauge, we should pay attention to control its amplitude below one millimeter...
After a period of using, some deformation and abrasive wear will inevitably occur in the movement of the pressure gauge, and various errors and faults will occur in the pressure gauge. In order to ensure its original accuracy without distortion of value transmission, it should be replaced in time to ensure that the indication is correct, safe and reliable. Pressure gau...
MAINTENANCE OF BIMETAL THERMOMETERS Aside from occasional testing, little or no maintenance is required. Be sure that the gasketed glass cover is on the case at all times, as moisture and dirt inside the case will eventually cause the thermometer to lose its accuracy. (See caution note below.) If the thermometer is used for measuring the temperature of a material that m...
Crane Electronics works alongside some of the world’s biggest brands within industries such as Automotive, Aerospace, Construction, Marine and Rail. Its aim is to deliver complete torque management, measurement and control solutions in order to satisfy the needs of the manufacturing industry for improved quality, improved safety, complete traceability and increased produ...
Powerful single and multi axis servo applications require high-resolution, high-speed encoder systems and high-performance transmission technology between the frequency converter and the sensors for field control, speed and position control. Often the position encoders are integrated directly into the motor housing. Measured on the motor shaft, the position finally reach...
Barksdale, a leading manufacturer of industrial controls, is pleased to announce the first release of the Generation 3000 Series with IO-Link digital communication protocol: the BPS3000, an electronic dual pressure switch with a 4-digit display is now equipped with IO-Link protocol. The BPS3000 is part of Barksdale’s Generation 3000 Series of electronic products that inc...
SENSY weighing load cells have a wide range of capacity (up to 3000t) and are designed to be used in the harshest industrial environments (marine, hazardous area (ATEX gas + dust), high temperature (up to 180°C), etc.). It is therefore essential for us to understand your needs so that we can help you to define your project and thus provide an optimal solution. For ex...
The distance sensors of the LAS-T5 series from WayCon Positionsmesstechnik enable reliable, reproducible measurements, e.g. for factory automation, in keeping with the Industry 4.0 theme. Alongside positional measurements in industrial automation or distance measurements in quality control, the sensors are also suitable for measuring the thicknesses of various objects. D...
Shaft misalignment is a major contributor to rotating machinery breakdowns. Accurately aligning shafts can prevent a large number of machinery breakdowns and reduce unplanned downtime that results in a loss of production. SKF has developed a range of affordable, easy to use shaft alignment tools that are suitable for a majority of alignment tasks. Select your shaft al...
Continuous development of the systems increases not only efficiency but also flexibility when it comes to selecting packaging materials. In order to ensure higher and more consistent quality for consumers, one of the most important tasks is to prevent contamination of food and beverages. Undetected foreign objects can cause injuries, lead to costly product recalls and c...
After an intensive project period of 12 months, the RHEINTACHO series of eddy current tachometers (including an optional gearbox), has now been approved by our certification partner CML according to Annex II of the Potentially Explosive Atmospheres Directive 2014/34/EU for all EU countries and the UK. The project was initiated by market requests of potential customers...
Bronkhorst High-Tech BV, the Netherlands, has expanded its database of gas and liquid properties with 1000 fluids to over 1800 fluids. This comprehensive database, called FLUIDAT (www.fluidat.com), is used by the company for configuration and extremely accurate calibration of its extensive portfolio of flow meters and controllers, and for calculating pressure differences...
With the Sipart PS100, Siemens is presenting a new positioner that is impressively easy to commission and highly robust. The Sipart PS100 can be initialized quickly at the touch of a button, automatically adjusting itself to the attached valve. If required, it is possible to optimize the positioner for a specific application with just one further touch of a button. Just ...
Equipped with a new, highly efficient detector and three forms of noise-reduction technologies, the GCMS-TQ8050 NX is capable of performing unprecedented quantitative analyses of ultra-trace amounts, down to the femtogram level. Moreover, with its ultra-high sensitivity and high mass resolution, a whole new realm of quantitative analysis is offered, with reduced long-te...
FastCAL 3000 is a high temperature blackbody source with a capacity to produce high temperature using high emissivity emitter(graphite tube) and at the same time stabilize at the required temperature within a few minutes. It is mainly used to calibrate non-contact temperature sensors. Step change in temperature is achievable within seconds. The graphite tube has an emi...
Capacitec has announced the global market debut of the Gapman®Gen3, a "next generation" high-precision, non-contact portable thin gap electronic feeler gage, offering enhanced measurement capabilities for an expanded range of gap measurement applications. Among the main design enhancements of the "next generation" Gapman® Gen3 are: higher resolution output (0.00001"/ 0...
WILSONVILLE, Ore. – July 27, 2017 – FLIR Systems Inc. (NASDAQ) today released a new Gigabit Ethernet-based (GigE) machine vision camera, the FLIR Blackfly S. Ideal for a range of applications including display and PCB inspection, microscopy, robotics, 3D scanning, intelligent traffic systems, the Blackfly S gives machine vision developers the tools to quickly develop inn...
Wachendorff Automation has extended the absolute encoder series WDGA by the Industrial Ethernet interface PROFINET-IRT. With its new WDGA58F design, Wachendorff has succeeded in constructing the world's smallest design in an axial and radial direction. That saves valuable installation space and can therefore be crucial in new or refined machines, as the trend towards ev...
