The roadside parking management system is a parking and operation management system based on Internet of Things, cloud computing services and intelligent sensor technology. Roadside equipment such as Curb machine and video pile is an important part of the system. By installing Benewake LiDAR, real-time detection of vehicles can be realized, and through the change of di...
Shaw Moisture Meters (USA) have relocated office to: 882 S Matlack Street STE 107 West Chester PA 19382-4505 Customers in North America will continue to receive sales and support directly from the SHAW (USA) office, where our friendly and knowledgeable staff are available to support and advise on all your dew point enquiries.
Thanks to the integration of the Energy Harvesting Technology, the AMM5 high-resolution kit encoder does not need batteries and mechanical gears for multiturn tracking, so it can be even more compact and precise. • Battery-free revolution counter • No gears no wear no battery concerns • Outer diameter 55 mm / 2.165”, through hollow shaft 25 mm / 0.984” • Up to 23 bit si...
Ultrasonic specialists expand product range with acoustic camera SONASCREEN SONOTEC, the ultrasonic specialists based in Halle, Germany have expanded their product range with the new acoustic camera SONASCREEN. The camera generates acoustic images from both the audible and ultrasound frequency range. The device enables maintenance teams to quickly locate leaks in compres...
Flow sensors are based on the vortex street principle after Kármán. The Kármán vortex street describes the flow around a body, which in turn forms counter-rotating vortices. This measuring technique allows mass flows to be determined with a high degree of accuracy. These flow sensors are used in the areas of heating, heat pumps, water treatment, dosing, etc. Huba Contr...
For the production of cement, sand is taken as raw material either directly from ship delivery or from internal storage facilities. Experience shows that the material has a higher moisture level when delivered by ship. Previously, the material moisture was checked manually in the laboratory. The customer was now looking for a continuous moisture monitoring system for the...
For pressure measurement of aggressive chemicals (acids, alkalis), the use of conventional stainless-steel sensors is not possible (material incompatibility). For this special type of application, Huba Control offers the 526 and 528 series pressure transmitters with a PVDF pressure connection. The fitting is available in G 1/4 and G 1/2 and has excellent chemical and me...
SENSOCAR is a company with more than 30 years of experience in manufacturing load cells and weighing electronics. From our origins as a family business, we have always searched for the proximity to the customer to work together in the design and selection of the most suitable products in order to offer the best solutions. We are committed to the local manufacturing, wit...
Heavy machinery in specialist civil engineering requires precise and reliable components in order to be able to perform the respective functions reliably. The absolute rotary encoders WV58MR from SIKO GmbH, manufacturer of sensors and positioning systems, are part of the safety concept for the pile drivers from Stump-Franki Spezialtiefbau GmbH. They are attached to three...
The range of Finder timers includes versatile and functional products, with a wealth of application possibilities. These timers can be mono-function or multi-function, with time scales from 0.1 seconds to 24 hours and with high input / output isolation. Most are 35 mm rail mount devices, but some are plug-in and panel mount. The Type 84.02 SMARTimer allows easy and flex...
- Easy front configuration - 1A standard output - 4 selectable scales - Compatible with Rogowski coils MFC140 and MFC150 - Compact design - For DIN rail mounting RPS51 is a multiscale Rogowski coil integrator whose design is based on the latest technology to offer dynamism, precision and versatility of use. An integrator is essential to equalize and shift by 90° the o...
The relative and differential pressure transmitters of the 699 series have switchable pressure ranges and are available with or without display. A full version includes further customer-specific setting options. Sensors specially developed for each pressure range allow physically accurate and long-term stable measurement. The wide variety of versions allows versatile use...
On more than 100 pages, it shows many exemplary measurements from the fields of: - Paints, Coatings & Inks - Polymers - Food - Pharmaceuticals & cosmetics - Bitumen, petrochemical and miscellaneous. In an introduction, the basic concepts of rheology are explained, making this a small standard work, especially for beginners but also for advanced users.
The new HFM 446 Lambda for measurement of materials with low thermal conductivity delivers up to 40% faster measurement results and saves valuable resources in Eco-Mode. Compliance with standards is made easy and high sample throughput with reliable results at consistently high measurement accuracy can be achieved – a real added value for insulation material manufacture...
Weinstadt, 21 April 2021 – Companies need to carry out comparative measurements of their HSK tool holders and HSK spindles at regular intervals to obtain optimum production results. Digitalised production processes can then bring to light new requirements. KELCH GmbH, the system supplier of components and services for the machining industry, has therefore added a smart H...
Our zws sensor family has two additional sensors with the measuring range of 350 mm. The ultrasonic sensors are available with switching or analogue output. Discover the zws sensors for level control with a small beam and for fast object detection.
Yole Développement, the internationally renowned market survey and strategic consulting firm, has launched its latest industry analysis entitled Thermal Imagers and Detectors 2020 – COVID-19 Outbreak Impact – Preliminary Report. The report reveals that in 2020, the global infrared thermal imaging market exploded. Regarding shipments, U.S. company FLIR ranks first with a ...
Controlling mass flow in metal production processes is the essential parameter for yield and quality. Controlling and improving mass flow means to have the width of the roll gap under control so that the material thickness of the final product remains as consistant as possible. If thickness before the roll stand and velocity before and after the roll stand are known and ...
While absolute pressure measurement is used to make weather forecasts or altitude measurements, relative pressure measurement is used, for example, to determine filling levels by measuring the hydrostatic pressure of the respective medium. Relative pressure always forms the difference to the ambient pressure, which consequently leads to an external environmental dependen...
Passi Test is a tester designed to know accurately the real quality of the stainless steel. Through a “probe pen”, which is put on the surface to be tested and which contains an electrochemical system and a reading external unity, Passi Test measures the open-circuit potential and the nobility of a metal and its resistance to corrosion. The result is given in about 15 s...
Aplicaciones Tecnológicas has the software to design the most efficient lightning protection system in the sector according to current regulations. CD-RISK is the professional application that allows risk calculation and selection of the Protection Level of a building with regards to the Technical Building Code (SUA8) and UNE standards (EN 62305 and 21186), in addition t...
During combustion or incineration process, acids are produced due to the composition of the fuels or plastics or other materials contained in the waste. Neutralization/absorption of these species prior to the dust filtration treatment is essential to avoid damage to the filter media and excess of emissions.This operation is carried out by injecting a quantity of l...
In the packaging industry, plastic containers are used for the storage and transport of liquid media. Hereby bottles, canisters, drums and IBCs (Intermediate Bulk Containers) are used, which cover a large volume range from approx. 0.5 l to 1,200 l. Ideally, these have to be tested for leaks in the cycle of the production process. Due to the good availability, compressed ...
provoked lung disease COVID-19. The protection of our employees, maintaining the production capacity as well as securing deliveries on time are the focus of all efforts of Huba Control to support the functionality of all equipment worldwide highly needed for medical and hygienic infrastructure with reliable pressure measuring technique. Differential pressure transmitt...
The wavelength chosen will impact Raman intensity, spatial resolution, background fluorescence, acquisition time, and the potential cost of a Raman system. Lasers used in Raman spectroscopy range from the UV into the near-infrared and beyond. Different wavelength regions offer advantages and disadvantages with the final laser selection largely dictated by the sample bein...
Designed for domestic and service sector applications, the IFX-E3 heat meter links the flexibility of the “ONE” function (Optimized & Nimble Elaboration) with the opportunity to have different protocols simultaneously. Its precision features make it the perfect instrument for shopping malls, offices and light industries applications, in addition to the classic residenti...
Summer period is traditionally the season where good weather and holidays are most enjoyed, but it is also the time of year where more cumulonimbus convective clouds are formed which produce lightnings. Every summer, news about fatal outcome accidents involving people due to an inadequate protection, resurface. Moreover, these discharges are one of the leading causes ...
Aviation test equipment manufacturer, ATEQ Aviation, has recently acquired a Chicago-based manufacturing company. Since 2002, Cobra Systems, Inc. has specialized in test adapters and kits for all aircraft. Founded in 2008, ATEQ Aviation is the newest of ATEQ Group’s three divisions. Aviation takes its place alongside the Leak Testing and Tire Pressure Monitoring divis...
Capanivo CN 7100 - capacitive point level measurement Full, Demand, Empty Detector Compact version Level limit detection in liquids, slurries, foam, interfaces and solids Vertical, horizontal, oblique installation. Enclosure version. 2-wire 4/20 mA switch. Price competitive level control device. Simple installation and set up. M...
It is well known that the steel castings need to be tested for flaw detection during the finishing and machining stages, and the internal defects of the steel castings, such as cracks and shrinkage cavities, can be further detected through the inspection. According to the way of flaw detection, the flaw detection methods can be divided into: ultrasonic flaw detection, ma...
POSIC launches the miniature linear absolute encoder kit AP9200L, which provides the absolute position in SSI format over a range of 38 mm with a resolution of 0.02 um and a maximum speed up to 15 m/s. The highly miniaturized encoder measures only 20 x 20 x 3.5 mm. With a scale thickness of 0.9 mm, the overall profile height is below 5 mm. Due to its Eddy-current sens...
Malvern Panalytical, a global leader in high-performance analytical instrumentation and materials analysis solutions, today announced that their ASD TerraSpec® Halo mineral identifier was selected and used in multiple research projects aimed at expanding U.S. efforts in Martian planetary exploration. These selections represent some of the initial steps towards advanc...
POSIC extends ist product portfolio with the IT5602C: a rotary encoder in the form of an SMD-component with dimensions 8 x 10 x 0.8 mm. Resolution and maximum speed are programmable up to 22 bits (1 million lines) and 8600 RPM respectively. The output signals are A- and B-pulses in quadrature and an Index-pulse that is synchronized to the A- and B-transitions. Thanks to ...
The red and green arcs can be mounted in different lengths and positions on the window, even on already installed instruments. Thus, without any great effort, any scale range desired can be defined. When ordering small quantities of instruments, the new accessory (model designation 910.33) is a cost-effective alternative to the corresponding dial layout. The adhesive...
SPECTRO Analytical Instruments, the arc/spark innovation leader, introduces the SPECTROLAB S high-performance arc/spark optical emission spectrometry (OES) analyzer for the analysis of metal in process control and research applications. The analyzer represents a real revolution in high-end OES metal analysis — featuring SPECTRO’s proprietary CMOS+T technology and deliver...
A new FLIR technical note focuses on the impact a faulty connection can have on the operating efficiency and safety of a transmission system. This is why it’s important to inspect all connections regularly to ensure they are working optimally. However, this can be a challenge, as systems comprise of a lot of small connections and are often inaccessible. Conducting re...
