The sensors are TÜV-certified in accordance with the Machinery Directive (EN 13849) Performance Level PLd, Category 2, and SIL 2. They are used to safeguard machines and plant components as well as for reliable position detection within this environment. Rounding off this new portfolio are inductive sensors with an increased temperature range, as well as increased EMC re...
The meters provide real-time monitoring of current, voltage, instantaneous power, demand and energy consumption of each circuit in a panelboard, including the main feed. They can monitor up to 48 independent, user-defined inputs on one single meter board, and for maximum flexibility support all industry standard communications protocols, including RS-485, BACnet MS/TP, B...
It has a full range of 30 MN (about 3,000 tonne-force) and was custom-made for a European Institute for Civil Engineering Materials Testing. This reference standard is huge (about 80 cm high and wide). Its tube shape and dimensions were designed to match those of a testing machine at the Materials Testing Institute. Special attention was paid to the design of the h...
The tracker controller developed by the RION can calculates automatically the trajectory of the sun, the azimuth and elevation angle of the site at any time with the value of the local longitude, latitude and time. During the tracking, the system sends commands automatically according to the tracking range to control the operation of the electric actuator. The trackin...
RSB 3600 Series sensors are EGMR (enhanced giant magnetic resistance) devices that retain their angular position even when power is removed. The sensors retain that angle information for years without power. So there is no need for batteries. Operating speed is up to 12,000 RPM. Key specifications for RSB 3600 Series include 36.5 mm profile, count to 16 turns, angular...
Contact avoidance is essential for maximizing uptime. Seventy percent of unexpected equipment downtime is caused by component failures, of which proximity sensors account for a large proportion. E2E sensors are designed to help manufacturers reduce potential causes of unplanned downtime while benefiting from the sensors’ environmental resistance. The addition of IO-Li...
The strength of F.lli Giacomello s.n.c. has always been the ability to establish a unique and privileged relationship with the customer. This peculiarity leads the company to customize and develop together with its interlocutor the level suitable for every need and condition of use, as happens for the IEG: levels made to measure for the customer, for lengths and points o...
BCM SENSOR has recently launched a new model 725F high pressure transducer. This model is specially designed for hydraulic chocks of longwall mining machines. In this underground mining application, the automatic hydraulic chocks work as the powered roof support so that shearers can work efficiently and safely beneath the roof. This 725F transducer can be used to control...
TL720D is RION company newly developed Small volume angular gyro sensor based on latest MEMS inertial measurement platform , by means of the dynamic attitude algorithm for the angular velocity of gyroscope ,it can simultaneously output carrier’s azimuth angle .The product inernal integrated RION’s Patent Inertial navigation algorithm, through the model of attitude angle ...
UWT supply level limit and continuous measurement sensors for bulk solids and liquids. Different measurement techniques are used depending on the medium and application in question. A distinction is made between continuous level measurement and point level detection. Furthermore, we offer complete systems for level monitoring and visualisation, working together wit...
POSITAL FRABA has added a new communications interfaces for its innovative Dynamic TILTIX series – making it even easier to use these rugged instruments in mobile machinery and heavy commercial vehicles. Now available with either CANopen or SAE J1939 interfaces , these acceleration-compensated tilt sensors are able to deliver accurate measurement under the harshest opera...
POSITAL has announced the full implementation of 2- and 4-wire versions of the single-cable BiSS Line interface for its family of motor feedback kit encoders . The combination of single-cable connectivity and POSITAL’s cost-efficient kit encoders provides motor manufacturers, machine builders and system integrators an economical way of building accurate, reliable absolut...
The state-of-the-art LTM Thickness Measuring Systems from ROLAND ELECTRONIC are subject to constant further development by our engineers and technicians in order to be able to reliably meet your requirements for the future. Beside the proven triangulation sensors, our thickness measuring systems now also feature confocal systems. These now also allow a high-precision...
FORCE MEASUREMENT ON TIES FOR LOAD-BEARING BEAMS The surface movement or slippage of a man-made mound of waste (a slag heap) can have disastrous consequences. Capteur de force instrumentation genie civil In order to contain this kind of movement, reinforced concrete beams are installed and are supported, along with other structural members, by tie beams set in t...
The pressure gauge can thus be used in hazardous areas for ignition protection type Ex h zone 1 (gas) and zone 21 (dust). For safety-critical processes in the pharmaceutical and food industries, the model PG43SA-S and the other instruments in the series are also suitable as a result of their “dry measuring cell” (no risk of contamination by the transmission fluid), t...
Compliant to the API 670 standard, these intrinsically safe probes are suitable for non-contact measurement of shaft vibration position, position and speed in hazardous areas where potentially explosive gases or dusts are present. Typical applications include monitoring reciprocating machines such as turbines, pumps, compressors, fans, motors and gearboxes across a wide ...
According to the company, CTIA/WFA CWG Test Plan Version 2.1 is a typical test specification and procedure for evaluating WLAN performance using OTA measurements. The standard test procedure is used in North America and is also referenced by other regional test bodies. It is expected to become the de facto standard for the increasingly popular IEEE802.11ac specification....
The design of the CRASH-CAL system integrates MB’s own Model CAL25AB air bearing shaker, together with its Model 407-8X multi-channel signal conditioner; MB 500VI power amplifier; and Win475 CRASH-CAL software, facilitating the simultaneous calibrations of up to eight piezoresistive accelerometers (DUT’s) of the same model and type, over a frequency range of 10 to 4000...
Design engineers are frequently challenged with monitoring and/or controlling processes, lines, hoses, and more. Many of these aspects may involve industrial hydraulic or pneumatic equipment and systems. Real-time pressure measurements can play an important role in this. Pressure transducers can provide the means of measurement and/or feedback used for design on test sta...
Measuring a mere 8-mm thick, the component is an absolute, non-contact, and wear-free position sensor with measurement ranges from 100 mm to 5,750 mm. The sensor system consists of a magnetostrictive waveguide and a moveable position magnet. The sensor is resistant to dirt, moisture and dust, and resists shocks up to 50g and has protection class IP67. Analog and di...
The PAV1000 series was designed as an economical, high-performance air velocity sensor for thermal management and filter monitoring in space-constrained locations, such as rack enclosures with air cooling in data centers. Unlike thermistor-based solutions, the Posifa MEMS sensor core is minimally affected by ambient temperature changes and provides instant real-time feed...
The RT-50 Battery-Powered Flow Rate Transmitter offers a local and remote display of flow rates in locations where equipment is exposed to different environmental elements. When operating locally, the transmitter offers a six-digit LCD display that continuously shows either the flow rate or total. When using Bluetooth connectivity, users can opt to view readings and a...
The offering combines OmniVision’s OV2778 2MP RGB-Ir image sensor in tandem with GEO’s GW5200, which provides dedicated hardware for processing the RGB-IR sensor. The result is high-quality video for both machine vision and viewing applications to provide easily integrated solutions for the detection of objects and unattended children, remote monitoring, and recording in...
The sensors for measuring tilt, acceleration and vibration consist of a silicon sensor element made in accordance with a patented micromechanical process (HARMS, AIM) in conjunction with a signal-processing ASIC in a hermetically sealed SMD housing. They achieve resolutions of 10 µg or 0.0005° (2 arc seconds) depending on the bandwidth. In addition to standard models, Fi...
The sensor handles pressure ranges from 15 to 500 psi, even at high temperatures. Its structure is combined with backside pressure measurement that minimizes the number of media-sensitive wetted materials. The purpose of this backside sensing design is to ensure the measured media only touches the backside of the measurement element. Other features include a Total Err...
According to the measurement range, it can be divided into the following categories: Diaphragm pressure gauge: the upper limit of measurement is less than 0.1 MPa. General Pressure Gauge: upper limit of measurement is 0.1 MPa( including 0.1 MPa) to 6 MPa (including 6 MPa). Medium range pressure gauge :upper limit of measurement is 10 MPa (including 10 MPa) to 60 M...
After a period of using, some deformation and abrasive wear will inevitably occur in the movement of the pressure gauge, and various errors and faults will occur in the pressure gauge. In order to ensure its original accuracy without distortion of value transmission, it should be replaced in time to ensure that the indication is correct, safe and reliable. Pressure gau...
1.Accuracy Grade The accuracy grade should be determined according to the requirement of production technology, economy and practicality, detection method, and the allowable error required by the minimum measured pressure. Pressure gauges for general measurement, diaphragm box pressure gauges and diaphragm pressure gauges should be 1.6 or 2.5 grades. For precision pres...
1.Pressure gauges must be placed vertically during prevention and control: wrench should be used to tighten the installation, do not screw the case with the hand, because this will cause the surface to be damaged. Don't let it collide during transportation to avoid damage. 2.When using pressure gauge, we should pay attention to control its amplitude below one millimeter...
The remote reading thermometer is based on the relationship between saturated vapor pressure and temperature of evaporating liquid in a closed temperature measuring system. When the temperature change is felt by the thermometer, the saturated vapor in the closed system produces corresponding pressure, which causes the curvature change of the elastic element, causes the d...
MAINTENANCE OF BIMETAL THERMOMETERS Aside from occasional testing, little or no maintenance is required. Be sure that the gasketed glass cover is on the case at all times, as moisture and dirt inside the case will eventually cause the thermometer to lose its accuracy. (See caution note below.) If the thermometer is used for measuring the temperature of a material that m...
Car maintenance is vehicle maintenance and repair referred to, is the failure of the car through the technical means machines, find out the cause of the problem, and take some measures to make the debugging and restore reaches a certain performance and safety standards. Car maintenance including overhaul and minor repair, overhaul is refers with the repair or replace any...
1, outlook size and weight, etc more than design vehicle clearance and use special vehicle. 2, after special or change his costume or dress, with fixed installation equipment, main function is not used for manned or freight vehicles. 3, bear special service and suspension special vehicle number, to install the use alarm and sign the vehicle lamps and lanterns. For exam...
The F199 measures angles from 0 to 360° with less than 0.01° resolution and absolute accuracy of ±0.15° across the entire measuring range. This addition complements the current portfolio of inclination sensors, which includes the F99 series. The current F99 inclination sensors from Pepperl+Fuchs are based on a two-piece mounting concept, which makes them sturdy. A met...
The MSC7401 controller is designed to be operated with LVDT and LDR measuring gauges and displacement sensors. These sensors are primarily used for measuring displacement, distance, position, oscillation and vibration. This offers application versatility for measurement tasks in automation, quality assurance, test bench, hydraulics and automotive technology. Parameter...
Crane Electronics works alongside some of the world’s biggest brands within industries such as Automotive, Aerospace, Construction, Marine and Rail. Its aim is to deliver complete torque management, measurement and control solutions in order to satisfy the needs of the manufacturing industry for improved quality, improved safety, complete traceability and increased produ...
