#Product Trends
Products Recommended
electric and phenumatic multi connector tube panel
As an important engineering technology for modern production automation and automation control, pneumatic technology has been widely used. In the production process of the factory, pneumatic technology is inseparable from the use of air pipes. Today, we will introduce the electric and phenumatic multi connector tube panel, one of the pneumatic products.
The electric and phenumatic multi connector tube panel is a device that connects multiple tubes used in the production process to a central interface. Use the electric and phenumatic multi connector tube panel to integrate multiple pneumatic equipment or pneumatic circuits through the same distribution point to facilitate the management, maintenance and expansion of the pneumatic system. Fu Yansheng's KDM series of electric and phenumatic multi connector tube panel are divided into three types: 4, 6, and 8 according to the outer diameter of the pipe, and can connect 10 or 20 gas pipes at a time.
Electric and phenumatic multi connector tube panel installation (panel installation method is introduced here)
Just like installing the wall panel, we open a hole according to the model and specific needs, guide the socket side into the fixed end of the panel, lock the 4 fixing screws on the docking plate, and fix the socket side. After locking, align the plug side with the socket side, tighten the screws at the concave and convex areas, and then tighten with a wrench.
Note: The gas-electricity docking plate can be installed with a fixed bracket
:
Advantages of multi-tracheal docking trays
① Reduce installation space.
The installation space is more compact than using multiple panel-mounted feed-through pipes.
② Assembling and disassembling blocks greatly reduces installation time.
It can realize the installation and removal of multiple air pipes, and each air pipe corresponds to the corresponding one, so there will be no mismatching of pipes, reducing problems in the installation of air pipes and saving installation time.
③The pipe connection is quick.
The air pipe docking plate has a quick-change connector that can directly connect the air pipe, reducing piping man-hours.
The above is about the content of the tracheal docking plate. Generally speaking, the use of air pipe docking plates in pneumatics is very convenient for the transportation, movement and replacement of panels and equipment!
