Hydraulic press 4 columns vertical for SMC molding 3000T 4C by GMR presse

The press in question is designed expressly for the operations of forming of plastics sheet to hot.

Horizontal slider of the lower bank, in order to allow easy loading of the molds in the machine and unagevole extraction of the finished piece in the event that its dimensions are such that it can not be extracted under the press.

Device for control and correction of the parallelism between the movable platen and the bench nellultima molding step to ensure that the material is distributed properly inside the mold, and avoiding harmful side thrust components.

The system consists of 4 points of response and control to the sides of the cabinet.

Maximum thrust force: 3000 Ton

Maximum pull force: 100 Ton

Maximum opening between floors: 2,400 mm

Racing mobile surface: 1,900 mm

Passage between columns front: 3,200 mm

Passage between columns laterally: 1,300 mm

Dimensions of the plans: 3,200 x 2,600 mm

Approach speed adjustable: ~ 200 mm / s max.

Maximum speed pressed up to 1,000 tons: 20 mm / s

Maximum speed pressed to 3,000 tons: 5 mm / s

Minimum speed pressed to 3,000 tons: 1 mm / s

Opening speed adjustable quick: ~ 200 mm / s max.

Total installed power: 250 kW (including auxiliaries)

Voltage supply: 400 V

Fuel tank capacity: 5.000 lt.

Dimensions of maximum: 5,200 x 3,800 mm xh 10,000 hole depth (bench at floor): 2,000 mm

Overall height hole: ~ 8,600 mm