What are the characteristics of high speed presses?

High-speed stamping process is suitable for precise parts with a small size.

High-speed stamping process is suitable for precise parts with a small size.

The fast and sturdy machines guarantee a high production rate and low costs per part and are available in the range from 630 to 2,000 kN.

Compared with traditional stamping machine, the stroke speed is much faster than common machine.

These special requirements generally relate to stock control, slug control and excessive wear problems.

Speed-related problems typically start when press speeds exceed 100 strokes per minute. High speed stamping is one of the progressive die stamping, it has auto transfer feeding system. And it also special designed for lots numbers of parts production. Following picture shows the relation ship of the stamping cycle time with feeding speed.

STAMPING SPECIFICATIONS,

Press Rating: 30 to 90 Tons

Press Speed: Up to 1,500 Strokes/min

Maximum Press Stroke: 3 in (76.20 mm)

Maximum Press Bed Length: 57 in (1447.8 mm)

Maximum Press Bed Width: 33 in (838.20 mm)

Minimum Part Length/Width: 0.25 in (6.35 mm)

Maximum Part Length/Width: 7 in (177.8 mm)

Part Diameter: 0.25 in (6.35 mm) to 7 in (177.8 mm)

Part Thickness: .002 in (.051 mm) to .090 in (2.2 mm)

Tolerance: +/- .001 in (+/- .025 mm)