HZTB-1002 Impact sample insulation device

Impact sample insulation device

Equipment overview:

HZTB-1002 type impact sample insulation device is customized by our company according to customer requirements, which can ensure that the sample will not have a large temperature change after being taken out of the low temperature environment. It is also equipped with a movable bracket and a manual sample output device, which is convenient for use and reserves a temperature detection port and provides a factory test report.

The main technical parameters and configuration:

1. Sample insulation device:

One insulation box Meet ISO 179 and ISO 180 standard,

80 x 10 x 4mm (L x W x H)

can hold 20 samples.

One insulation box Meet ASTMD256 standard

63.5 x 12.7 x 3.17 mm (L x W x H)

can hold 10 samples.

The above two sample insulation boxes share one insulation box bracket

2. Material of the inner sample box: stainless steel liner

3. Insulation material: polyurethane foam, etc.

4. Equipped with a sample-out mechanism, only one sample can be pulled out at a time, and the operation is simple and convenient

5. Equipped with a fixed bracket, the bracket has a weighting plate, and the device can be placed in any position

6. Insulation effect: the temperature difference is less than 3 degrees Celsius within 5 minutes.

7. The corner surface of the device must be smooth, the texture must be strong, and there should be no burrs.