CUTLAMmicro 3.0 High-precision automatic 2 or 3 axis cutting machine

Designed for laboratories looking for an automatic machine adapted to high-precision, long and difficult cuts.

The CUTLAM® micro 3.0 is a bench-top compact cutting machine offering astonishing capacities. Thanks to its cutting wheel and table multiple motion possibilities and the feed speed control system the most complex work is possible.

Large-capacity compact cutting machine

Fitted with a large-capacity: 320 x 540 mm cutting chamber, it is equipped with a grooved aluminum table, sized 210 x 210 mm, and stainless steel interchangeable pallets.

The large capacity of the CUTLAM® micro 3.0 relies on the use of a 230 mm cut-off wheel, combined with a vertical movement range of 100 mm (Z axis) and a longitudinal movement range of 270 mm (Y axis).

Precision

The positioning of the axes, which can be seen on screen, is 0,01mm accurate. Feed speed while cutting can be set from 0,1 to 20 mm/sec.

User-friendly interface to always be in control

The large touch-screen allows you to select the different functions using an easy to use, intuitive interface.

All the positioning and cutting parameters are continuously visible on screen. The use of a joystick allows a fast positioning of the cut-off wheel; while in automatic and semi-automatic modes, an estimation of the remaining cutting time appears.

Three cutting modes are available: manual, semi-automatic and automatic.

Efficiency: 5 key points for higher productivity:

- A powerful motor of 1,1kW.

- A sequential cutting mode for a maximum cooling.

- Ingenious feed speed control:

The feed speed is preset, and will be automatically

reduced if the load on the cutting wheel increases. The preset speed returns when the load on the wheel decreases.

It improves the quality of the cut by limiting the heat damages on the samples.

Suitable for irregular samples and/or materials with heterogeneous hardness.

It prevents the wheel from breaking in case of overload.

It allows you to always work at maximum speed without any risk of damage.

- For repetitive parallel cuts, the CUTLAM® micro 3.0 may be equipped with the manual or motorized cross-feed table (X axis) option.

- An independent cooling/recirculation system, composed of a 100µ washable filter, and a 30L decanting tank with multi-point nozzle, insures excellent cooling of the sample and the cutting wheel even during intensive use.