Lasermet - the Glaser Jailer – New Active Laser Safety Window.

enables a high powered laser to be switched off virtually

immediately if the laser beam inadvertently strikes the

window.

The window is fitted within the panels of the “Laser Castle”

Laser Safety Cabin and electrically connected to the

interlock controller.

It enables personnel to view the laser welding operation

being carried out inside the laser cabin.

Multi-kilowatt lasers used for welding, cutting and cladding

can be made safe, preventing harm to personnel and

preventing damage to surrounding infrastructure by

incorporating the Glaser Jailer window.

It is suitable for all laser powers, wavelengths and

waveforms.

It can be combined with Lasermet''s “Laser Jailer” active

laser guarding system to provide a complete active solution.

This revolutionary active technology is already tested and

proven - and is currently in operation worldwide.

The Glaser Jailer window is continuously monitored while

the laser is in operation. A direct hit from a powerful laser

will cause the sensor panel within the window to activate

the interlocked controller which then turns off the laser.

This failsafe technology isolates the laser safety input on

the laser in less than 50 milli-seconds.

Following a direct hit the window should be replaced but

only after an investigation has been completed as to the

cause of the direct hit and corrective measures have been

implemented to prevent it re-occurring.

Dimensions

Viewing aperture is 50cm x 76cm Approx

Patents

Lasermet''s Active Laser Guarding Technology has

the following patents :-

US Patent No. 8 416 820

European Patent No. 2 592 326 CH+LI DE FR GB IE

NL SE

Australian Patent applied for: 2012202599