Sanwood Technology company News and Trends items

Sanwood UV lamp weathering test chamber can meet following Test Methods & Material Standards ◆ISO 11507《Paints and varnished-Exposure of coatings to artificial weathering- Exposure to fluorescent UV lamps and water》 ◆ ISO 4892-1《 Plastics-Methods of exposure to laboratory light sources-Part 1: General Guidance》 ◆ ISO 4892-3《 Methods of exposure to laboratory light s...

Do you know the working principle of Three-zone Thermal Shock Test Chamber? The chamber has three parts: pre-cooling zone, pre-heating zone and test zone. The three zones are independent. The three compartments are switched by the damper without moving the test product. When the temperature is normal, the ambient temperature is introduced into the test space by the bl...

What is Accelerated Weathering test? Accelerated aging test simulates and strengthens the laboratory test of the damage of the natural outdoor climate on the test piece, which can shorten the time of practice and more easily understand the performance of the product.

MIL-STD 810G High & Low temperature,tempearture shock and humidity test requirements and testing methods: 1. High temperature testing: -For storage: requires to run 7 phases of 24-hour as a circle with tempeature range +30C to +63C(no humidity needed); -For operation: requires to run 3 phases of 24-hour as a circle with temperature range +30C to +43C(no humidity nee...

IPX9 Ingress Protection Introduction Test method: High pressure spray test Test equipment: Spray nozzle diameter is Test condition:Spray angel:0 °,30°,60°,90°(4 position) Spray hole number:4 Specimens rotation rate:5±1 r.p.m, distance:100 to 150mm,each position 30s, water flow 14 to 16L/min. Spray water pressure 8000 to 1000kpa. Water temperature: 80±5°c Test t...

IPX56 Ingress Protection Introduction IPX5 Test method: Water Spray Test Test equipment:Spray nozzle diameter is 6.3mm Test condition:keep the distance between test specimens and spray nozzle 2.5 to 3 m. Water volume12.5L/min(750L/h) Test time:Calculated by specimens enclosure superficial area , 1min each square meter, at least 3 min. IPX6 Test method:Strong w...

Premium features for the ultimate in testing flexibility Are you looking for the smallest chamber possible to get your testing done? Hate the footprint and noise of other temperature chambers? Need to closesly integrate other test equipment? These are the Bench-Top Temperature (& Humidity) Chamber for you! Desktop Temperature (& Humidity) ChamberEasy to install and...

Coatings, plastics and other organic materials are exposed under natural climatic conditions and light radiation over a period of time there will be loss of light, faded, yellowed, peeling, cracking, loss of tensile strength and the whole layer off and so on. Even indoor light or also as a pigment or dye to such material damage through the glazing sun. Thus for paint for...

SANWOOD UV Light Accelerated Aging Test Chamber （hereinafter referred as SUV）adopts fluorescent UV lamp as the light source. Its inner temperature and humidity can be properly controlled to obtain the periodic condensation on the sample for fully evaluating the damaged factor caused by sunlight, moisture and temperature (materials aging phenomenon includes fading, dislus...

2D vison measuring machine: 1. 2D vison measuring machine (also known as vision-type plotter) is based on the CCD digital imagery, and is based on the powerful software capabilities of space geometry calculation and computer screen measurement technology. After the computer is installed with dedicated control and graphic measurement software, it becomes the measu...