SIGMATEK GmbH & Co KG company News and Trends items

Through the high output frequency (500 kHz), stepper motor output stages can also be operated in micro-steps. Additionally, the ST 011 has two digital inputs, which also can be used as a position latch (incremental encoder position). For the control of actuators, the module provides two potential-free digital outputs; one of which is back-readable. The super compact ST ...

The powerful PC 400 is designed for 24/7 continuous operation at full CPU load and supports all common operating systems. With the integrated Intel-Haswell graphic chip, the PC especially scores with complex operating and visualization applications. In addition to the HMI-Link, the PC 400 has numerous interfaces: 2x Gigabit Ethernet, 6x USB 2.0, 2x USB 3.0, 2x PS/2 for ...

The user can set separate PWM ratios for the pick-up and holding phase through the application. Per supply group, a current measuring function is implemented with which the load curves can be determined. For exact control of inductive loads, quick switch-off electronics are integrated into the module. In addition, short circuit, over-current and over-temperature monitori...

The supply voltage is divided into two groups, which are each monitored for over and under voltage. The VVO 323 is space-saving and measures 124 x 88.5 x 76.3 mm (L x W x H) and has a robust housing in the IP67 protection class. The output module is also equipped with seven status LEDs, which for example, provide information on the supply voltage of the digital outputs o...

The AI 040 is used for example, in machines and systems for sorting, drying or filtering bulk material of all kinds. Vibration sensors with an IEPE interface continuously measure vibrations caused by turning flow valves on and off. The data determined provide information on the status of the valve and whether or not it must be replaced. The S-DIAS module therewith increa...

In the new compact drive series, there are variants with three and four axes, which allow that the number of axes are precisely tailored to the application. Per axis, between 5 and 20 A rated current and 10 to 40 A peak current are possible. External plug-in feedback modules provide flexibility. The machine manufacturer can therefore customize the encoder systems to ...

The 7-inch wide screen panel with projected capacitive touch screen, LED backlight and a resolution of 800 x 480 pixels (15:9) enables a clear and detailed visualization of the machine data. With the dual-touch technology, handling machines and systems is simpler and more intuitive. Familiar gestures from the consumer world such as zooming, scrolling or other 2-finger mo...

The integrated standard resolver input (12 bits) enables economic feedback analysis (position feedback). A 24 V DC output is also provided for regenerative braking control. The integrated energy recovery in the intermediate circuit during braking maximizes energy efficiency; especially in multi-axis systems. The DC 061 is equipped with a 2-channel Enable input, which...

The encoder module is fast and precise. It has an ABR counter function, which can be operated as TTL or RS422, and an integrated encoder supply. Four digital inputs with an input delay of only 10 µs are also provided, as well as four digital outputs with a continuous load current of 2 A. The digital inputs can be used as end or reference switches. An additional position ...

S-DIAS, the new control and I/O generation from SIGMATEK scores with the highest package density, fast data transfer and comfortable handling. Mechanical interlocking ensures significantly increased vibration resistance. Modules for all automation tasks are available: I/Os with up to 20 channels, scalable CPUs, Safety, Motion and special modules. As with all SIGMATEK...