AUTOMATIC SAWS WHICH MADE HISTORY !

SHARK 332 NC 5.0, electrohydraulic band sawing machine with multimicroprocessor which can operate in automatic, semi-automatic, semi- automatic/dynamic and manual mode.

Automatic cycle (to cut from 0° to 60° left)

- Semi-automatic, semi-automatic/dynamic and manual cycle (for cuts from 45° right to 60° left). - CNC machine with a new controller : MEP 50 with Windows “CE” based. This new PLC has been specifically designed by MEP for the automation of its range of products.

A FEW FEATURES:

-7” touch screen display operator interface and push buttons for all functions of the sawing machine. It is simple and intuitive , it guarantees a reliable use and it controls all cutting parameters in real time.

- Console with all centralized controls, installed on an articulated arm to follow the operator in every operating position for the controls and the EMERGENCY.

- Visualization and registration of alarms and events with the possibility to visualize the story of occurred events.

- Electronic inverter for the continuous adjustment of the band speed from 15 to 100 m/min.

- Latest generation hydraulic control unit, with high efficiency and low energy consumption.

- Bar feeder with recirculating balls screw/nut and stepper motor (feed in length in one stroke 600 mm, that can be repeated in order to cut any length).

- Cutting head and feeding vice positioning with joystick.

- Automatic acquisition of the actual starting point of the cut.

- Electronic transducer to visualize band tensioning.

- Automatic adaptive shearing stress control system with servovalve mounted directly on the cylinder.

- Coolant tank inside the steel base with two electric pumps so as to lube-refrigerate band. The drawer to collect chips can be replaced with a motorized chip evacuator (see optionals).

- Preset to be equipped with the spray mist system (OPTIONAL), as well as with the standard- delivered traditional lubrication with emulsible oil.

- Wire chip brush for band cleaning.

- Machine preset for being handled by transpallet. - Bi-metal band for solids and sections.

- Service keys and instructions manual for maintenance and spare parts list.