NEW: homogenizer mixer by Nordson Polymer Processing Systems

The static mixer is installed right after the gear pump to improve the consistency of the melt feed to the die.

Benefits:

More uniform homogenization of polymer properties

Temperature

Color

Viscosity flow

Additives

Mixes colors uniformly

Higher quality product appearance

System integration with adapter to shorten length of the line

Features:

Static mixers come in six sizes from 1 to 4 inch diameters with six or nine element "twists"

More information

Details

Nordson Polymer Processing Systems

Associated Trend items

NEW: pellet dryer by Nordson Polymer Processing Systems

Nordson's BKG pellet dryer separates process water and pellets which are carried upward to top of the dryer in a helical motion via the fast rotation of the dryer shaft and angled rotor blades. Pellets exit the dryer continuously through the pellet discharge chute. Because of the rebound effect and the counter current airflow generated by the exhaust blower, the pellet outlet moisture can be reduced to less than 0.05% depending on the type of polymer.

Benefits: Good access to the pellet dryer via two large doors (front and back) allowing the one-piece screen to be cleaned or changed easily Features: Dual door dryer access for easy cleaning (front and back) Available options (SR version): self-cleaning spray jets, inspection window and lights

More information

NEW: plastic melt non-return valve by Nordson Polymer Processing Systems

The Xaloy locking ring valve is a general purpose three-piece design valve tailored to a wide range of resins.

Benefits: Improved wear life in abrasive applications Consistent part weight Features: General purpose three-piece design Zero relative velocity between ring and retainer Streamlined design for smooth lock-up Flow paths can be tailored to a wide range of resins Variety of construction materials

More information

NEW: extrusion pump by Nordson Polymer Processing Systems

The Kreyenborg discharge and extrusion pump type GPA is mainly designed for the discharge of low and medium viscosity melts, such as, adhesives or polyamides out of reactor vessels or mixing and storage tanks. Additionally, it is used for low viscous materials in extrusion processes.

Benefits: Discharge pumps designed specifically for low viscosity melts Pump inlet optimized to maximize filling performance through various channel geometries Drive-side threaded shaft seal with stuffing box packing leads to reduced operating costs Borings for pressure and temperature sensors integrated in the pump housing provides enhanced process diag...

More information

Compare

Remove all

Compare up to 10 products