The necessity of picking low and high epoxy resin refractive index liquid polymer adhesive glue coating for optical device assembly

Best High Epoxy Resin Refractive Index Liquid Polymer Coating Adhesive Glue Manufacturer

There are many optical cameras and sensors that are being added to different devices today. It is more than the smart devices today, there are other applications that need an optical pathway. So as to support the applications, materials are being tailored with the best optical properties.

There are many considerations that have to be taken when choosing the best. Apart from the considerations, there are issues that you need to be aware of to make the best decision and eliminate them. Picking a high refractive index adhesive may be a requirement in some applications.

Best Electronic Adhesives Manufacturer (18)

One of the technical issues that must be handled is haze. One thing to note about haze is that it happens after high humidity and high temperature testing reliability. The haze can be seen on the edges and grow into active areas. In such a case, the adhesive could have absorbed moisture. In case the structure of the adhesive is not capable of preventing the hydrolysis performance, it degrades much more easily.

The other key consideration is curing the edge completely so inhibition of oxygen is influenced. If the oxygen inhibition is affected, the edge has a tackiness that can absorb moisture in the reliability rest. This is to say that haze depends on the properties of the adhesives. In many cases, haze and delamination may occur at the center or edges. Sometimes they appear randomly.

Optical performance

High refractive index adhesive must maintain the highest optical performance data even after reliability conditions. The thickness of the adhesive is crucial when designing because it can achieve up to 300 um thickness. The optical performance can get worse in such a case because the area of contact with the atmosphere has been attacked by low humidity in the reliability tests.

It is important for adhesives to be capable of surviving high humidity and high temperature tests. The adhesives need to survive the UV exposure test as well. This is because UV exposure tests oxygen, wavelength, and high temperature.

The above factors can affect the yellowness of an adhesive. This means that the optical performance can be affected by two main things: the optical design of the particular structure as coating or sandwich and the reliability test as UV and high temperature exposure test.

Considerations

Before assembling optical devices, it is important to consider the refractive index performance as well as the optical plastic lens and what they have in terms of characteristics. It is important for the refractive index of the lens to match that of the adhesive. There are times when a mismatch exists. This is because the optical path can be influenced when a mismatch is present. In such a case, you may notice interface fringes. When there is a refractive index range in the adhesive, it contributes to a much easier optical design.

When there is a high refractive index in normal resins, there may be a high reflection loss problem where there is adhesion with crystal materials and glass with a high refractive index.

Best Electronic Adhesives Manufacturer (3)

For more about the necessity of picking low and high epoxy resin refractive index liquid polymer adhesive glue coatingfor optical device assembly,you can pay a visit to DeepMaterial at https://www.deepmaterialcn.com/High-Refractive-Index-Optical-Adhesive-ic287009.html for more info.