Zorba Aluminium Scrap Recycling Lines from JONO

separate metals from non-metals，aluminum from Zorba.

This shredder is used to shredder material from big size into 110mm. It is equipped with imported DC53 knives, axes with wear-resistant electrodes for surface treatment and repeatable weld. It is rugged and low cost. High speed high efficiency

This machine is used to remove ferrous material with weight 0.1-30 kg. It is can be used not only for quality improvement and purification of raw materials, but also can be used to recover ferromagnetic materials. It functions greatly in protection of damage and weary of grinding machine, shredder.

The eddy current separate can sort out non-ferrous metals such as cans, pull rings, copper and other plastic, fabric, wood bamboo, masonry and so on, which can reduce the generation of dioxin and re-use high-value recyclable resources.

Based on the physical rule of different densities lie in different materials. When heavy media(ferrosilicon) is put into the water, the liquid owns a fixed density, under such circumstance, light material like magnesium and plastic float on the surface, heavy material like aluminum,copper,zine sink in the bottom. By continuing to input the liquid, light materials could be flushed out. The heavy material in separated scrapers in the bottom, which will be lifted to certain height by rotating the drum. At some point, with force of gravity, they will fall into another sluts on the top in the drum, where liquid will be input and send heavier materials out.

This screen belongs to 2ZKK series of vibrating screen.The locus of screen body is a straight line.It is most widely applied to mining industry for hydration,sculting, desliming. The machine adopts the newly energy-saving vibrating motor or vibrator as the vibrating source,and isolate vibration by vibration-absorbed devices with advantages of durable use,low noise and convenient repair aibration-absorbed devices and etc.

The rotary dryer is mainly composed of rotary cylinder, lifting boards, transmission gear and supporting cradle. Working principle： in the rotating cylinder, the watery material shall be tossed up by the lifting boards, which are evenly scattered with alternate different angles on the cylinder, for the thermal current to heat the material so as to transfer the water inside the material into steam and hence released to the air.