#Product Trends
MCE electric cylinders with motor and Servo drive
Electric Cylinder MCE is suitable for simple applications in factory automation. High-performance features such as high speed, good positioning accuracy, and high repeatability are ensured through a precision ball screw drive and an anti-rotating pis
MCE Electric cylinders together with Unimotion standard motor and Closed Loop Servo drive enable PLUG & DRIVE solution. Compact dimensions and optimally selected motor combinations cover a wide range of applications. The aluminum cylinder profile includes T-slots on the bottom for fixing the electric cylinder, as well as side slots for clamping fixtures and magnetic field sensors. Options such as a female piston rod end and extended piston rod, together with a wide range of accessories result in a highly flexible product.
ADDITIONAL INFORMATION:
• Each MCE is optimally pre-lubricated and ready for a maintenance-free operation. MCE allows relatively high load capacities for moving larger payloads at high speed in both horizontal and vertical directions.
• All the MCE cylinders come with built-in motors and Unimotion drives unless you order the cylinders specifically without these features. For further detail please check the MCE/MSCE catalog.
• Excellent price-performance ratio.
Simple programing and dynamic positioning are ensured by Closed Loop, high resolution, and fast response of the Servo drive
Advantages of STDF Servo drives:
• No gain tunning
• No hunting
• Heat reduction
• Torque improvement
Different comunication protocols:
• Pulse-direction
• EtherCAT
• Eternet
• Profinet (available soon)
High performance standard stepper motors
• Built in incremental encoder (500 cpr/ 2000 ppr)
• Perfectly harmonized with Unimotion Servo
drives it enables top performance and low
heat generation
• High torque
• Version with integrated brake
• IP 65 protection class
• Built-in standard M connectors
Motor adapter VK with a coupling and a motor
A preassembled standard motor inline with a motor adapter and the elastomer coupling together with the standard electric cylinder.
Motor side drive with a timing belt and a motor
A preassembled standard motor parallel with the standard motor side drive and a timing belt together with the standard electric cylinder.
Multi-axis system
For applications, where higher resistance to lateral loads or torsional moments is required, a guiding unit GUC should be used. By using this type of a guiding unit, which offers high precision guiding and positioning, the electric cylinders can easily be combined into the multi-axis systems.