Particular attention was paid to identify a set of sensors stable and at the same time sensitive. For this purpose, it was also introduced a reference electrode with particularly high performance and with a high capacity of compensation of the pollutants. The used sensors allow a correct reading of the above parameters in the following applications: – surface wat...
Benefiting from a high performance scroll pump, that delivers deep vacuum, the EZ-2 Elite is able to routinely remove even very high boiling solvents such as DMSO and NMP. In addition internal heating of vapour duct and system components ensures that such challenging solvents only collect in the SpeedTrap™ condensor, and not anywhere else. The SpeedTrap condenser on ...
Thanks to contact-free infrared detection technology, the complete filtration unit is easily mounted into and dismantled from the cooling jacket. This results in the same accurate detection position in each test, which ensures high accuracy and excellent repeatability of test results. The pipette is not shielded and has no thermal insulation. Callisto 100 delivers excell...
Application: Temperature humidity environmental chamber is used to test various types of materials for their tolerances of heat, cold, dry, humidity. It is applied for quality inspection for all types of electronic products, electric appliance, and products from communication, instrument, automobile, plastic, metal, food, chemical, building materials, medical and aerosp...
It is applicable in the industry such as electrical power, coal, papermaking, petrochemical, cement, farming, medical research, and instruction to measure the Calorific Value of combustible materials. Technical parameters Calorimeter type: Isoperibol Temperature testing range: 5℃～40℃ Temperature resolution:0.0001℃ Precision: RSD≤0....
Simultaneous dosing and analysis of two drops obviates the need to change the test liquid during the material testing, as is the case with conventional dosing units. The dosing system is specially developed by KRÜSS. It doses two parallel drops within milliseconds, with high volume precision and minimal kinetic energy. In spite its high speed the procedure resembles the ...
- Presentation of KRÜSS‘ Micro Dispenser for fully automatic measurements of the CMC of surfactants at analytica 2014 - Accessory for the KRÜSS Force Tensiometer K100 - Creation of extensive concentration series for precise CMC measurement Hamburg, January 29th, 2014 – At analytica 2014, KRÜSS GmbH will present the Micro Dispenser, a dosing unit for fully automatic m...
Fully automated quality control for waste streams offers material benefits for waste processors and recycling companies. RoBB will pay OFF in a number of ways. First, there are the savings on the wage costs. The robot also delivers a very high purity and separation quality in the waste stream, which means higher returns per kilo of processed waste for waste processors an...
The TriStar II Plus contains all the capabilities of the popular TriStar II with additional hardware and software features. An improved dewar design provides more than 40 hours of continuous temperature control. A unique stainless-steel manifold is corrosive-resistant and designed for highly accurate gas management. A dedicated saturation pressure (P0) port is standard, ...
All the operator has to do is enter the shear stress or shear rate, temperature and test time requirements and Rheo3000 V.2 completes the data collection and analysis work. Rheo3000 V.2 can perform a wide variety of tests including: viscoelastic modulus, yield stress, viscosity vs. shear rate profile, thixotropy calculation, creep behavior, recovery after flow, and tempe...
This unique patent pending S1 TITAN accessory protects the detector window from being punctured by sharp objects like scrap shavings and wire, while still allowing rapid and accurate analysis of almost any material. This protective shield minimizes the chance that the detector will be damaged, thus avoiding the cost and hassle associated with the replacement of a broken ...
Complete: On 354 pages the new GC 900 covers the entire range with many new products, e.g., - TipBox, TipRack, TipStack™, the new tip system from BRAND - Titrette® 10ml, the latest addition to the worldwide first and only line of digital bottle-top burettes featuring error limits within Class A for glass burettes - macro pipette controller, with new design, for e...
Rapidly aging transformers and deferred capital spending on new equipment continues to put pressure on the viability of the U.S. electric power grid. As pressure on the grid rises, electric power professionals'' ability to accurately test and track performance through state-of-the-art tools becomes increasingly critical. To meet the needs of professional engineers in ...
Production and cleaning processes frequently generate wastewater, rinsing water or circulation volumes between 10 and 200 m3 per day. Reuse without treatment is usually not possible due to technical production considerations. On the other hand, money is lost when water is discharged, due to water and wastewater charges. Parameters such as for hydrocarbons and heavy me...
Technical Data : • Max. error 20 μm • IP67 protected • Bluetooth® Smart • Transmission distance up to 15m. • Absolute system • Automatic wake-up • Powered by standard CR2032 battery • Battery life up to 3 years
T-Box XL™ builds on the previous T-Box instrument but now features a 7” high definition colour touch screen and an upgraded processor that allows for faster synchronisation with the supplied Torque Data Management (TDMS) PC software. Most importantly, Norbar have listened carefully to the views from the marketplace to then develop the original T-Box and TDMS software in...
The new row dilution plate holder adds the functionality to perform serial dilutions in rows. Serial dilutions are often carried out in row format because it allows experimenters to dilute more samples (12 instead of 8 in a 96-well plate). The plate holder can easily be adapted to work with either 96 or 384 well plates. An instructional video demonstrating the new produc...
“Eriez Plate Magnets are the workhorses of magnetic separation,” says Eric Confer, Product Manager-Separation. “They help prevent costly shutdowns associated with machinery damage, prevent spark-caused fires and explosions, prevent product contamination and improve product purity.” ProGrade Plate Magnets are an ideal choice for an array of light industry applications....
• Up to two simultaneous digital measurements. Turbidity \ Suspended Solids \ pH \ diff. pH \ ORP \ diff. ORP \ Oxygen. • Measuring of Temperature using the PT100/PT1000 probe • Programming key pad with 5 keys • "CAL" Function Key to direct access to the calibration menu • "GRAPH" Function Key to direct access to the graphs of measure • “USB” Function Key for data d...
“Bollegraaf has a long tradition in the production of ‘best-in-class'' balers and have recently introduced several innovations and upgrades to their existing line of HBC balers. One of the most prominent features of these next generation balers is our innovative Variable Frequency Drive resulting in significant less energy consumption and less noise during operation. Bol...
For critical products, such as those in the aerospace or wind energy business, the selection of the right materials of utmost importance. Selecting the proper materials and ensuring their delivery is crucial. The assessment of suppliers and their delivery quality is difficult, but making an accurate analysis of supply sources and grades of material is required. Ideally, ...
The SITEX CP200D has a broad kV and mA output range (10-200 kV and 1-10 mA) and offer a 100% duty cycle at 30°C (ambient T°). Its multiple power supply range (from 90 V to 264 VAC) and power factor (0,99) allow the small and robust POWERBOX control unit to be operational with practically all mains power available in the world and the commonly used low power generator av...
Unparallelled ergonomics and an unprecedented three-dimensional stereo image, makes the eyepieceless stereo microscope from Vision Engineering a great alternative to conventional microscopes, low magnification up to 20x. The design of the low profile stand makes it ​​possible to optimise your bench top space to enable components to be inspected and manipu...
Each testing machine can be controlled by microcomputer. It not only can multi-functional operation with stand-only, but also can connect the computer by communication port to achieve remotely controlled. Such as: Optical cable crush testing machine Main Technical Specifications: Product model: GYW-10 Max load: 10kN Load measurement range: 1%～100%F.S. Lo...
Medit Inc, a big online supplier of NDT equipment and accessories, who endeavors to offer their clients latest solutions at most competitive prices, has announced a new addition to their comprehensive portfolio of innovative products – LED borescope light source SPARK XTR. The light and compact SPARK XTR offers users outstanding quality and intensity of light regardles...
Static grounding reels are used extensively in the fuel industry, where they are often mounted on refueling vehicles and on platforms at fueling stations. They are also used in industry to ground large pieces of equipment, such as conveyor belts, mixing machines, and dust collection equipment, especially where there may be a potential risk of explosion due to static elec...
Maximizing compaction rate and prolonging the lifetime of a landfill with optimal operating costs are the main objectives of today''s waste management professionals. Tana will increase the compaction rate with the minimum of 10 % in comparison to other manufacturers. How is that being done? How can Tana achieve 10% higher compaction rate than anyone else? The most si...
Function： The AST - S Manual Test Stand can cooperate with imported and domestic various types of tension and compression force gauge (push pull force gauge) for pull pressure load, dial, strength tests slide,destructive test and so on. Features: ①　Simple operation - hand pressure operation ②　Smooth operation - rack-and pinion...
The permitted maximum values for formaldehyde emissions of wood based panels are continually reduced. The demand for low-emission wood based panels below the E1 level has been increasing for years. This is where known and proven methods, such as the perforator, come up against limiting factors. For low-emission boards, there is often no correlation between the values of ...
Advantages of LSSD Testing The method of testing general sealability of flexible packages is to increase pressures inside the packages; and we need to create pressure difference between inner and outer packages to simulate the actual pressure state when inspecting sealability of these flexible packages. There are two ways to implement the testing: positive pressure meth...
Formaldehyde (HCHO) can be difficult to measure in hot, wet emissions, not least because it would dissolve in condensate if the sample gas is allowed to cool. Test engineers in Germany have therefore deployed portable (Gasmet DX 4000 and CX4000) FTIR analyzers to measure formaldehyde. The complexity of formaldehyde analysis has necessitated sampling and laboratory ana...
This machine uses servo motor to drive reducer, then synchronous toothed belt drive ball screws to realize transmission, it is steady and speed is accuracy. The load will be record every time, so it is convenient to the time when crack appears. When the sample is clamped, the system will send signal to make stamping system work. Cup drawing fixture is open structure, con...
In order to increase sensitivity and to extend reasonable exposure time there is the possibility to cool down the sensor to < -20°C. Features: Extended Spectral Range 1200nm to 2200nm High-Speed USB2.0 (industrial save!) 14bit A/D Resolution Thermo Electrical Cooler Upto 110 fps Global Shutter Exposure time from 10µs upto 3s ...
The unit can be easily cleaned with an optional wet-vacuum making routine service faster & easier. For applications where the dust generation is further away from the collector, empty downdraft tables or extraction arms are popular options.  The wet dust collector works by drawing dust-laden air in through the inlet on the back of the...
All parts in contact with the sample (sampling, pump, filters, capillary ...) are heated and regulated to 191 ° C to prevent condensation and allow high concentrations of heavy HC measurements. Easy to use, with low maintenance, Graphite 52M is available in 3 versions for simultaneous and continuous analysis: • Graphite 52M- S : Measurement of THC • Graphite 52M -D m...
It can be used for sample analysis of machinery, steel, geology, metallurgy, rare earth and magnetic materials, environment, medical industry, biology, marine, petroleum, new chemical materials, nuclear industry, agriculture, food inspection, water quality and other fields. It can quickly and accurately detect about 70 kinds of major and trace elements. Technical par...
