BSTFLEX Woven fiberglass Tape is fabricated from high quality type E fiberglass that will not burn and will withstand continuous exposure to temperatures of 1100°F / 593°C. These high temperature woven fiberglass tape provide protection of industrial wires, cables, hoses, tube and pipe and also provide thermal insulation and personnel protection. Also used as a gaske...
Forwarder, skidders, harvester, crane… all these forestry machines consume a lot of hydraulic hoses. Facing numerous constraints due to a challenging environment, the hydraulic hoses need to be changed regularly. Most of the forest sites are hardly accessible. On-site maintenance can be made thanks to a mobile workshop, guarantying high levels of productivity and ensur...
BST-FGST fiberglass insulation tape is weaved by no-alkali fiberglass yarn, with good thermal resistant and insulation features, which is widely used for windings of motor and transformer. the main component is E-glass, oxidation sodium, for which the content of oxidation of alkali metals is no more than 0.5%. The tape is overlaped by 50% when wraping, which prov...
When Clippard invented miniature regulators in 1962, the MAR Series became very popular as a simple, robust, and cost-effective regulator in a small package with exceptionally long life. As regulator applications continue to increase, Clippard is meeting the demand with the newest addition to the reputable regulator line. The new M-DR-2 Series provides greater accurac...
HS(R) series slurry pump is widely used in metallurgy, mining, mineral processing, dredging, de-watering, water treatment, coal washing, mill, cyclone feed, tailing, power, building material...etc. various industrial sites. HS pumps are called different names for different working duties: Mineral processing pump, Mill discharge slurry Pump, Booster pump, Feeding pump, Ta...
Our innovative system is the perfect match for a wide range of spray guns, including GRACO® Perform AA 15 & 50, G15 & G40, CATECH Bobcat, ANEST IWATA MSGS-200, SAMES-KREMLIN® MVX™ and XCITE™, DURR Optima® 2000™ & 2100™, SATAjet® 3000K™, WAGNER® & TITAN® 4600/4700, BINKS® Trophy, and Asturo® K1 3A Mix™. The Tria Pro45 kit includes an aircap base, a reversible tip, and bo...
APPLICATION The dismantling of marker vessel “Emile Allard” in the port of Dunkirk was carrioed out by the RB Diag Company. Due to Budget constraints it was preferable to dismantle the vessel while afloat as opposed to a dry dock. The vessel hull was built in 1949 was badly damaged. It was therefore necessary to secure it for the tow to the decommissioning dock. De...
ZeroCon® -Crown is made of solid high-purity stainless steel and serves as a safe and quick threaded connection of pipe networks, pipe joints and welded systems. Features: + Absolutely leak-tight: Consistent material quality — Helium-leak-rate is ≤ 10-12 mbar + Zero dead spaces: Space between seal ring and joint: ≤ 10-25 μm + Perfect pharmaceutical barrier: No r...
EXAIR’s new 1 NPT Back Blow Air Nozzle has been designed to effectively blow debris and liquids from pipe or hose inside diameters, axle housings, bores, holes, internal threads and other internal part features found in hydraulic cylinders, gear boxes, differential housings and more. An array of holes provide a forceful 360 degree airflow to clear out coolant, chips and ...
Rotofluid delivers 300 Series Continuous Casting Rotary Unions to one of the biggesst Iron & Steel Mill in Russia. Quantity: 150 pcs 3/4" 300C Series Single Flow Quanitity: 200 pcs 3/4" 300C Series Dual Flow with 163mm Internal Pipe Design features: Max. Pressure: 10 bar Max. Temperature:120C Max. Speed: 100 RPM
TOPSFLO 12V 24V Micro DC Brushless Water Pump Specification: Max Flow Rate: 16L/MIN 18L/MIN Max Static Lift: 6M 8M Rated Voltage: 12V / 24V Impeller Type: Closed impeller Motor Type: Three-phase brushless DC motor Application: Electric Instant Water Heater/shower system Cooling System Water circulation system Swimming Pool Higher pressure machi...
1. Usage and Application Range SSA series centrifugal sand pump includes virtually all of the features of the SM series pumps. SSA series pumps are more compact in design and can be adapted for hydraulic motor drive.These features make .SSA series pump ideal for use in applications such as oilfield frac trucks as well as blending and pump charging for water well drillin...
"E_OS – Energie_Optimierung-Schlammbehandlung" (energy optimization and sludge treatment) is the name of the largest project at the ebswien main sewage treatment facility in the energy arena. The core of the system will be six digesters, each 30 meters high, in which sewage sludge is converted to treatment gas. This gas is then converted to energy and heat in thermal pow...
The pressure regulators type R120 are suitable for compressed air and many technical gases, for example: oxygen, combustible gases, carbon dioxide or argon. Depending on control range the max. inlet pressure is 30 bar or 50 bar. Housing and internal parts are made of brass. Low temperature version down to -40 °C / -40 °F, optionally high temperature version up to 130 °...
Making unbeatable results possible for our customers is our philosophy. The newly developed Flottweg Z3E Decanter Centrifuge brings us a good step closer to that goal. It combines the entire know-how of our employees to live up to our slogan Engineered For Your Success. But what exactly sets the Flottweg Z3E apart? Flottweg provides an easy-to-open cover for easy, qui...
Self-cleaning filtration has numerous benefits. Indeed, operation costs are reduced and no consumables are required. Automatic filters can be installed as equipment protection (pump, heat exchanger, etc). Besides, very low maintenance is necessary, the whole installation productivity is thus significantly increased. The FTL filter (Tangential Filtration in Line) is a...
Features: 1. Open impeller design, ideally dealing high viscosity drilling slurries. 2. Combination seal for a long service life. 3. All pump models, use same frame support, convenient in maintenance and cut down costs. 4. The major parts are made from anti-wear nodular iron,and long service life.
The float valves, consisting of a PA 66 plastic body and an EPDM membrane, are mainly characterized by a high long term performance capability, high operating safety and a maximum operating pressure up to 10 bar (145 psi). Furthermore Cv-values of 25 l/min (DN 13) respectively 53 l/min (DN 17) are realized. Characteristics • Servo-controlled • Designed for narrow a...
The valve housing in fluid contact is made from thermally resistant poly phenylene sulphone (PPSU). Thus, it can withstand temperatures up to 98 °C / 208 °F. The material is approved by KTW (hot water) and W270 (microbiology). Furthermore, NSF 169 approved variants are available and other certificates can be achieved upon request. In comparison to brass components, whic...
The valve solutions consist of food-approved materials, which can be optionally equipped with a PTFE valve seat, inhibiting the build-up of lime scale and contributing significantly to the prolonged life of the components. The actuators of the valves are media separated by a membrane. The valves are offered either, as a cost effective one-piece valve housing, or as an e...
Furthermore, the dosing of constant volumes or the design of controlled fluidic paths can easily and smoothly be realized without water hammer by the linear motor. The valve is also an efficient and optimal solution for low flow rates without a complete shut off function. With a pressure range from 0 – 10 bar the valve is used e.g. in hot and cold vending machines, in cl...
The miniature valve is available as latching version with nominal orifices of DN 0,5 and DN 0,8 or as a monostable type with the nominal orifice of DN 0,5. Beside the achievable flow rates of 0,13 l/min (DN 0,5) respectively 0,31 l/min (DN 0,8), the protection type IP 65 is a further advantage. Both valve components, consist of a plastic body (LCP), are suitable for ap...
The Drinking Water Directive 98/83/EC defines a maximum lead content of 10 µg/l in drinking water for the European Union. This limit came into force on 01.12.2013. In the USA the Safe Drinking Water Act came into effect in 2014. Along with the ‘Reduction of Lead in Drinking Water Act', the ‘Safe Drinking Water Act' limits the lead content to 0.25 % in total for all ins...
Further advantages of the valve series is its short closing time, allowing a precise control, for example when filling tanks. Despite the high flow rate with a Kv value of 12.4 l/min and the short closing time, the valves fully meet the requirements of EN 60730 in terms of water hammer. Typically the angle valves are available with a G ¾ threaded inlet and a 11.5 mm noz...
These pumps are self-priming, accurate, adjustable and user-friendly. With these pumps, you can adjust your flow rate from 0 to 100 ml/min. Thanks to the integrated electronics and USB, RS485 and CANopen interfaces, they are easily and fully programmable. An integrated encoder on the motor provides a closed-loop system and ensures the integrity and accuracy of the ...
Pressure nozzles – which are also known as 'single-substance nozzles' – use their own energy to atomise the liquid that is being supplied to them. There is usually no need for any additional compressed air or steam. The pressurised liquid is released into the surrounding gaseous atmosphere as a jet or lamella. All kinds of sprays and droplet sizes are possible, depend...
Emerson has launched a new ASCO Numatics valve which extends the application range of its Valve Islands. The addition of the 502 series valve means that ASCO Numatics valve islands can now handle individual flow ranges from 400 l/min to 3820 l/min. When coupled with the innovative G3 or 580 series electronics the ASCO Numatics valve islands boast one of the smallest fo...
WN type Dredging Pump is horizontal, single-stage cantilevered structure, which is designed to meet the requirement of the contractor demanding and comprehensive dredging requirement. WN type dredge pump impeller passage is very wide, to continuous pumping gravel or high plastic clay and not happens jam. The minimal amount of wear parts design in these dredge pumps resul...
High viscous products such as ointments, creams and gels do not naturally flow. For this reason, they are dispensed into tubes or jars. Dosing syringes are used for the precise application of highly effective substances. By pressing down on the plunger, the user can dose the product more accurately and easily and apply it more cleanly. As is the trend with highly effecti...
The WDT Kelly Cock Valve is easy to operate and pressure tested to 2500PSI. As a standard, Western Drilling can build and certify its Kelly Cock Valves up to 10,000 PSI (6.8 MPA). Each Kelly Valve is pressure tested and certified. Precision machining and excellent quality control set WDT Kelly Cock Valves apart from the rest. All of the components and parts are manufactu...
For the food industry a version with stainless steel blade and frame, as well as food-grade seal is available. The VIB is a gravity Slide Valve for all kinds of powdery or granular materials stored in silos or bins.
• Connection system for solvent weld, threaded and flanged joints • No metal parts in contact with the fluid • Piston with counterweight able to work with high intensity fluid • Limited pressure drop. Only minimum back pressure is required for the hermetic seal • Valve material compatibility (PVC-U) with water conveyance, drinking water and other food substances acco...
The SNX is a robust rotary joint that performs well in steam and thermal oil applications. The SNX rotary joint line is available in sizes from 2" to 4" and can be used in dual flow applications. The rotary joint is rated up to 288°C, 20 bar, and 450 RPM.
Tensile force 70 KN or 50 KN. The cylinder functions as load bearing , either as a cable joint in line or anchoring to the pylon. The automatically locking control device, makes it possible to use the hydraulic circuits of the Unit during voltage build up, then to disconnect them in order to supply a sleeve cutter, another cylinder, or a sleeve press. Comprising of :...
Head ( H ): Max. 5-34 m Discharge: Max. 34-3910 LPM Flow( Q) : 2-234 m3/hr Rating: 1 HP to 10 HP Features: Anti-Rust Corrosive motor housing. Non -clogging, minimized abrasive wear. Superior back to back double mechanical seal. High efficiency motor: Specially designed submersible motor with IP68 Protection and F Class Insulation.
> 180 and 265cc displacements > 350 bar continuous pressure rating > Long bearing life > ISO Mount and Shaft > Optional through-drive > Highly responsive controls
