▶ INTRODUCTION HCM370B-HCM375B is a high accuracy 3D digital compass of strip shape, its width is only 1.6cm, IP67 protection grade, suitable for many harsh environment such as drilling measurement. It adopts advanced hard iron and soft iron calibration algorithm, it can provide the high precision heading value output when both pitch and roll angle at any angle wit...
SP38M-UART adopts high stability monosilicon sensor technology with bulit-in differential pressure, pressure, temperature sensing elements and high performance dual-channels ASIC with 24bit adc, to calibrate for zero and sensitivity of second-order temperature drift and third-order nonlinear which improved the temperature performance of the sensor. It’s a comprehensive a...
In a chemical company, dust is measured in the exhaust air of all dryer lines. Previously, measuring instruments were used for this purpose based on an optical measuring method. The disadvantages of these turbidity measurements are the high purchase price and the continuous maintenance effort to keep the lens dust-free. The company was looking for a maintenance-free,...
Objects that are behind these electrically non-conductive materials are also detected. OndoSense was founded in 2018 by Mathias Klenner and Axel Hülsmann, two radar and high frequency solutions experts from the Fraunhofer Institute for Applied Solid State Physics in Freiburg, Germany. OndoSense is now investing in the further development of the technology: In the fut...
The OEM-2306 offers the same machine control as the KD-2306 signal conditioning electronics in a smaller, bare PC board format. The OEM-2306 is factory configured for each unique application. The system’s board level configuration makes it suitable for integration into OEM equipment. Additionally, the OEM-2306 is RoHS compliant and supports the full line of Kaman sens...
Ready for Industrial Internet of things (IOT) applications, WiLow® IOT sensors integrate natively MQTT (Message Queuing Telemetry Transport) data frame, a lightweight and open-source (OASIS & ISO/IEC 20922:2016 standards) Internet of Things protocol. MQTT is designed to support wireless networks with varying levels of latency due occasional bandwidth constraints or un...
In the second generation of its near-infrared (NIR) technology for image sensors that operate in low to no ambient light conditions, OmniVision Technologies offers silicon semiconductor architectures and processes that have hit new heights in quantum efficiency. The Nyxel 2 technology provides a 25% improvement over the preceding generation in the invisible 940-nm NIR li...
Sporting superior phase noise at higher frequencies, Keysight Technologies’ N9021B MXA X-Series signal analyzer provides design validation and manufacturing engineers with superior phase noise performance at higher frequencies, and includes software that improves workflows while meeting 3GPP 5G new radio (NR) compliance standards. Industries from wireless to satellite...
Sanwood Non contact electrical thermometer
Many companies with trapezoidal thread gauges face a dilemma when it comes to calibrating them. The solutions available on the market are either imprecise or extremely expensive. Today, Trimos is able to offer an innovative and simple solution for the measurement of large trapezoidal threads based on its horizontal instruments. Three-wire measurement: This is one o...
In the age of IoT revolutions, more city governments globally have begun the incorporation of smart waste management solutions to increase the efficiency of waste collection and the satisfaction of citizens. WoMaster launches smart waste management by NBIoT enabled smart bin sensors that measure how full a trash bin is. The measured data is in turn transferred to the Clo...
Proven effective in numerous customer applications, our OGD distance sensors with Photonic Mixer Device (PMD) technology are highly versatile problem-solvers for the most challenging tasks. Thanks to the combination of time-of-flight measurement (ToF), background suppression and evaluation of the reflectance, the OGD distance sensors continue to provide stable and precis...
Application: Exhaust gas scrubber uses the contact between gas and liquid, and transporting gas from the contaminants into the liquid, then separate the clean gas from the contaminated liquid to achieve clean air, and use average flow measuring tube or pitot tube collocation differential pressure transmitter to achieve flow monitoring. Practical application: Semicon...
Parking has always been a timely and stressful experience in all major cities. Finding available parking can consume a lot of time and fuel, and therefore increase more CO2 emission. WoMaster introduces a new smart parking sensor by detecting the occupancy of the parking space and sending the data to the ThingsMaster OTA cloud server. The PS102-IRGM-NB-BT27 Dual-detecti...
Based on the market demand, Jiwei has newly developed an ultra-high temperature vibrating rod level switch. This type of vibrating rod level switch is featured with the function of water cooling (air cooling) and is able to work reliably under ultra-high temperature conditions that up to 400℃. This new design has applied for the national patent. In modern industrial a...
The devices of this line are available in many design versions, for example QM-212-00-0-3-0-11-1-10-3-3 is the model featuring an integrated temperature and humidity probe, is equipped with a display, two relay outputs, and the RS-485 port. In one of the applications this model is used to control the temperature and humidity in the document archive room. The device au...
58 mm industrial size Ethernet encoders from Lika Electronic are now available in both axial and radial connector output configurations. The new axial connector output configuration widens the range of the mechanical and electrical options offered to the booming Ethernet market. Industry is migrating towards Ethernet Industrial Ethernet is at the heart of IoT and Ind...
These devices have been certified in compliance with IECEx and ATEX directives and are suitable for use in mines, oil and gas facilities, agricultural applications, chemical plants, woodworking factories and milling operations. Explosion-proof TILTIX inclinometers have been carefully evaluated to ensure that there are no hotspots or exposed electrical components that ...
The new Baxtran catalogue for 2020 is now available with all of the brand’s newest products and accessories. Among our latest developments is the new A70 multi-function scale, one of the star products in the new 2020 catalogue. The A70 scale is designed to be used both in the checkweighing sector and for counting parts. In the latest update to the commercial catalo...
Minebea Intec’s freefall metal detection system Vistus RS enables the reliable inspection of metallic foreign objects. The product’s low installation height means it can be easily integrated into existing systems and, when combined with the Vistus Terminal, offers a detection solution which guarantees product quality and effective production. The purity of materials use...
The founders of Vancouver’s Damon Motorcycles sought to use technology to make motorcycling safer. Plan A was to develop a sensor-laden helmet to aid the rider’s situational awareness, reports chief technical officer and Damon co-founder Dom Kwong. But upon consideration, Kwong and co-founder and CEO Jay Girard concluded that it would be better to build safety tech in...
What do the tire pressure of a car and the clamping force of a lathe chuck have in common? Both should be checked regularly to ensure the maximum process safety and efficiency in daily use. The new versatile clamping force tester IFT is designed for this purpose. It can be used on 2, 3, and 6-jaw chucks up to 6,000 RPM regardless of the chuck manufacturer, and at a maxim...
A new camera in FLIR Systems' optical gas imaging (OGI) series, the connected GF77a provides upstream and midstream gas processors, producers, and operators with the ability to monitor continuously for invisible, potentially dangerous methane leaks at natural gas power plants, renewable energy production facilities, industrial plants, and other locations along a natural ...
With the ISZL series, WayCon Positionsmesstechnik GmbH is expanding its portfolio in the field of inductive sensors. Typical applications of the high-resolution (up to 0.01 mm) sensors include absolute distance measurements, thickness measurements, sag and deformation controls, linear displacement measurements, position controls, centering monitoring (diameter and eccent...
SOMERVILLE, Mass – While many companies are attacking the problem of keeping autonomous vehicles on the road through technologies such as advanced cameras, lidar, and GPS, a startup called WaveSense has taken the issue underground – literally. The company is developing sensors with ground-penetrating radar (GPR) that uses ultra-wideband radar technology to create a ma...
The NoisePen personal noise meter by Pulsar Instruments is the ideal tool to assess whether your employees are at risk of noise-induced hearing loss by exposure to excessive noise. Worn on the shoulder, this cable-free pre-programmable dosemeter enables measurement and monitoring of the noise levels an individual is exposed to throughout their working day or shift. T...
The CTC-652 is the tallest of JOFRA’s CTC Series calibrators and is the only industrial-grade temperature calibrator with a 200 mm insert. This insert provides the CTC-652 with an immersion depth of 190 mm, making it ideal for calibrating long sensors. The CTC-652s large insert allows it to calibrate difficult sized sensors, like long capillary sensors found at transf...
SPECTRO Analytical Instruments has introduced the eighth generation of its SPECTROMAXx with iCAL 2.0 ARC/SPARK OES Analyzer — improved with innovative new capabilities and advancements in performance to achieve fast, accurate elemental analysis precisely tuned for material control and foundry applications. The SPECTROMAXx may well be the industry’s leading OES line wi...
Based on a 10 µm pixel design and incorporating a resolution of 1280 x 1024 pixels, the sensor offers high sensitivity and an on-chip gated global shutter mode that enables gating times down to 42 ns. The unit allows adaptability to various scenarios, with precise 3D information detection and 1.3 MP depth resolution; scene capture with a large field-of-view in both 2D an...
Rather than the bulky transformers of traditional inductive sensors, these sensors use printed circuits, which makes possible compact, accurate, lightweight, reliable and robust position sensors with no contacts, no delicate parts and no maintenance. The encoders have two main parts—a stator and a rotor—each shaped like a flat ring. The large bore makes it easy to accomm...
s: a Resensys structural health monitoring system that was deployed on the structure consists inclinometer 2d (tilt) and level meter SenSpot sensors. Inclinometer SenSpot sensors also measure temperature in real time. Also, a wireless camera was deployed on the bridge. SeniMax data logger with remote communication gateway were installed to collect data from SenSpot gauge...
Keeping air temperature and humidity at a proper level is of key importance to the printing process and the storage of printing materials. What has been used in the application to monitor 10 rooms is the QM-212 model in two different versions: QM-212-00-0-2-0-00-0-10-3-2 equipped with an integrated temperature probe, QM-212-00-0-3-0-00-1-10-3-3 equipped with an inte...
Lévis, Canada, November 12, 2019 — Creaform, a worldwide leader in portable and automated 3D measurement solutions, announced today the release of HandySCAN AEROPACK, a 3D scanning solution suite that addresses the specific challenges of aircraft quality control, such as assessing damage from hailstorms or aircraft incidents as well as flap and spoiler inspections. The H...
General Description HCA528T is a high accuracy dual-axis inclinometer, output adopt the standard industry electronic interface 4 ~ 20mA, can be long-distance transmission of up to 2000 meters. The product uses the latest MEMS high technology for production,internal using high-resolution differential digital-to-analog converter, by the internal MCU system secondary line...
The world’s largest optical telescope, the 10.4m Gran Telescopio Canarias (GTC) on the Canary Island of La Palma, is equipped with a powerful astronomical camera built by the University of Sheffield, UK. This camera, called HiPERCAM, was commissioned on the telescope in 2018 and can take over 1000 pictures every second simultaneously in five optical colours. The five...
General Description DMI410 is a digital display inclinometer which took RION company three years to develop professional for various industry angle controle and measuring.The core of this product is using the micro-mechanical control principle, dual-core measurement unit, can use the Y-axis to compensate X-axis during the measurement process,a and then to use RION pa...
