DZ-6 End Quenching Testing Bench

DZ-6 type end quenching testing bench is mainly used for laboratory material end quenching test.

The test bench was developed based on the technical parameter requirements in GB / T225-2006 Steel-Hardenability test by end quenching. The shape is beautiful and generous. The whole machine frame is formed by bending and welding of stainless steel plates. The water tank is independently welded and formed in the frame. It has cooling and heating functions to ensure constant water temperature. The cooling water enters the nozzle through the silent circulation pump, and the water utilization rate is high, and there is no waste.

Ⅲ. Applicable Standards

1.GB/T225-2006 Steel-Hardenability test by end quenching (Jominy test)

2.ISO 642: 1999 Steel-Hardenability test by end quenching (Jominy test)

Ⅳ. Main Technical Parameters

Technical Parameters

Workstation 6

Nozzle diameter φ12.5±0.5mm

Distance between nozzle and end of specimen 12.5±0.5mm

Spraying height (no specimen) 65±5mm

Specimen size Φ25x100mm

Water temperature control 20±5℃

Size of water inlet G1/2

Time set range 1S~99M59S

Dimensions (length x width x height) 1550mm×700mm×1300mm (including castors)

Power supply AC220V

Power 3.0KW