NEW: Servo-controlled angle valve DN 7

The elbow nozzle design of the new servo-controlled angle valve with the nominal orifice of DN 7 is a space saving solution particularly for narrow installation conditions. The materials in media contact are approved for drinking water and 100% lead-free. UL, WRAS, VDE certified variants are available. Furthermore, the valves are suitable for hot water up to 90 °C. Therefore, they are ideal as inlet valves in potable water applications.

Further advantages of the valve series is its short closing time, allowing a precise control, for example when filling tanks. Despite the high flow rate with a Kv value of 12.4 l/min and the short closing time, the valves fully meet the requirements of EN 60730 in terms of water hammer.

Typically the angle valves are available with a G ¾ threaded inlet and a 11.5 mm nozzle outlet connector. The valves are suitable for a pressure range of 0.2 - 10 bar.

Coil systems for common voltage and frequency ranges are available. The DC or AC operation has no effect on the hydraulic behaviour. Please contact us for samples!

Advantages at a glance

• Servo-controlled angle valve with a small footprint

• Suitable for hot water up to 90 °C

• Approved for drinking water application

• Optimized water hammer characteristic by low noise emission according to EN 60730

• Long term performance capability