The JL-3000 drop weight impact test machine is a test machine developed and manufactured to meet GB6803-2008 "Ferritic steel without plastic transition temperature drop weight test method", ASTM E208 "Standard Test Method for Conducting Drop-Weight Test to Determine" Nil-Ductility Transition Temperature of Ferritic Steels "and other standard drop-weight impact testing ma...
The UELONG series of electronic extensometers have the characteristics of high precision, high sensitivity, good stability, and ease of use. They can be used for static and dynamic mechanical performance tests of metallic and non-metallic materials. Measurable material's elastic modulus E, specified plastic elongation strength RP, specified total elongation strength Rt, ...
→This machine is used to test leaf springs for road vehicle and other vehicle. →Comply with ISO18137 Leaf Springs-Technical specifications. →Spring types: multi-leaf spring with eyes, parabolic spring with eyes, multi-leaf spring with one eye and one sliding end, parabolic spring with one eye and one sliding end, multi-leaf spring with sliding ends, parabolic sprin...
The LTM by ZwickRoell is an electro-dynamic testing machine that utilizes patented linear motor technology to perform fatigue and endurance testing. The oil-free, electro-magnetic drive is ideal for materials sensitive to contamination, and the patented ventilation and cooling system keeps thermal influence to a minimum and will not affect room temperature. Previously li...
Following on from part 1 more time will be spent on case studies comparing the Mastersizer 2000 and Mastersizer 3000 so the customer can understand the process in detail. The presenter has spent a lot of time helping clients in this area so can outline when things go well and when things are more challenging. Anyone that is thinking about, or is in the process of tran...
Application: Metal detector Machine used mainly for food and other requirements of high detection sensitivity industries, for the detection of inclusions or lost in the raw materials or products of broken needle, wire or lead, copper, aluminum, tin, stainless steel and other metals.
A drop weight tester for impact testing with an installation height of approximately 9 meters, a weight of significantly more than 10 tons, and a drop energy of 120,000 joules was delivered to the Essen-based testing laboratory Gövert, by ZwickRoell. In the future, tests will be performed on various pipe wall specimens on the customer’s behalf using the drop weight teste...
Reliability, long service intervals, low operating costs and quiet operation are among the top of the wish list for vacuum technology in the laboratory. Nothing is more annoying than a vacuum pump that gives up in the middle of a vaporisation process. In addition to the intelligent and easy control of vacuum in the laboratory, the PC 3001 VARIO select has been specially ...
Charpy impact testing machine is used for measuring the performance of the resistance of metal materials in the dynamic load impact, in order to judge the material properties under dynamic load.
TZONE USB temperature data logger TempU04 features a plug-and-play USB port interface and allows for faster access to data collected in any cold chain management process. This could be used in pharmaceuticals, food, life science, cooler boxes, medical cabinets, fresh food cabinets, freezer or laboratories. No software required, the PDF and CSV files will be generated aut...
1.Dynamic balance detection and automatic correction 2.The power head can be automatically moved up and down to adjust the weight-removing position. 3.Automatic iron scraping extracting function 4.Optional pneumatic marking function & scan code function 5.Single-plane automatic balance correction of disc-shaped workpieces.suitable for mass production of dynamic balan...
1.Application: It is applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal, rubber, plastic, spring, textile, and components testing. It is widely used in the corresponding industries, research and development, test institutes and training centers etc. 2.Standard: ASTM, ISO, DIN, GB and other internat...
Hitachi High-Tech Analytical Science Corporation (Hitachi High-Tech Analytical Science), a Hitachi High-Technologies Corporation (TSE: 8036) wholly owned subsidiary engaged in the manufacture and sales of analysis and measuring instruments, today expands the analytical capabilities of the established LAB-X5000 XRF elemental analyser to include a new helium purge option f...
Potassium bromate, as an additive of flour, was widely used in flour production. It has two functions, one for white-rich, the other for paste ferment, which can make the bread softer and more beautiful. However, the scientists from Japan, Britain and America have found that potassium bromate is a human carcinogen, which will be harmful to humans' nerve center, blood and...
Bromate is a kind of strong carcinogenic substance，which is the byproduct of disinfect treatment using ozone. It is a necessary inspection item fmineral waters production. Using CIC-D120 ion chromatograph, SH-AC-11 Column and 15.0 mM NaOH eluent
TSI introduces a new range of AeroTrak®+ Remote Airborne Particle Counters (APCs) for monitoring manufacturing cleanrooms. TSI is so confident about the performance of the new laser technology inside, that all models are covered by an industry-exclusive standard 5 year laser warranty. AeroTrak+ Remote APCs supply uninterrupted, reliable particle counting data during...
IPX56 Ingress Protection Introduction IPX5 Test method: Water Spray Test Test equipment:Spray nozzle diameter is 6.3mm Test condition:keep the distance between test specimens and spray nozzle 2.5 to 3 m. Water volume12.5L/min(750L/h) Test time:Calculated by specimens enclosure superficial area , 1min each square meter, at least 3 min. IPX6 Test method:Strong w...
An imaging system's color measurement accuracy is highly dependent on its internal color filter system. Two kinds of filters are common for color measurement applications of displays—Bayer Pattern (RGB) filters and CIE-Matched Tristimulus (XYZ) filters. Depending on the measurement application, each filter can provide more or less accurate color data. When it comes to em...
Dimethyl sulfoxide (DMSO) is an important polar aprotic solvent that dissolves both polar and non-polar compounds and is miscible in a broad range of organic solvents as well as water. Because of these properties it is widely used as a universal sample storage solvent. However, samples dissolved in DMSO cannot be as easily recovered compared to other solvents, as it is v...
This machine is mainly used for the gauge marks (also used for non-metal materials) of the plate specimens referred to in the GB/T 228 standard.
As vessels and equipment for producing pharmaceuticals routinely require cleaning by a CIP/SIP process, it is only possible to use measuring devices that are capable of withstanding high temperatures and strong chemicals. When an autoclave is employed the gauges face further challenges, typically with temperatures up to 140 °C. Therefore LABOM delivers a mechanical p...
TThe OX-TRAN 2/40 Series of Oxygen Permeation Analyzers is the first permeation instrument custom-designed to test whole packages. The OX-TRAN 2/40 integrates a large environmental chamber with OTR testing into one instrument to ensure precise test gas conditions and accommodations for a wide variety of packages and containers. Using MOCON’s unique and innovative Test ...
Building upon over 50 years of freeze-drying experience, the LyoS 2.0 control system delivers unmatched process control for all stages of the cycle, from freezing to primary and secondary drying. User definable process alarms protect your valuable product and automated system tests to ensure your lyophilizer is running optimally. All of this in a software package that ...
This machine adopt the oil cylinder down-setting type, is mainly used for metal, nonmetal tensile, compression, bending and shear test. Test operation and data processing in accordance with GB/T 228-2010 "metallic materials tensile testing" requirement, if change the structure and related parts replacement and can meet the ASTM, ISO and other international standards requ...
Designed for pharmaceutical and biotech labs, the AdVantage Pro has comparable shelf temperature uniformity (+/- 1.0°C) and system vacuum control performance to larger production freeze dryers, but in a convenient benchtop package. At only 26 in (66 cm) wide, the Advantage Pro requires a minimal amount of your valuable bench space, yet enables product to be safely proces...
The new Empyrean is the first fully automated multipurpose X-ray diffractometer, allowing a wide variety of measurements without manual intervention. The newly developed MultiCore Optics, featuring iCore and dCore, are taking over and ensure easy automatic switching between configurations. There is no need for the instrument to pause during nights or weekends, waiting fo...
The Ultra is a true workhorse system - flexible and small enough to fit into a laboratory but with larger shelf and condenser capacity to enable those involved in small-scale production or scale-up research to process larger batches. Control options are available to provide cGMP-compliant data monitoring and automation applications for 21CFR11 requirements. With the U...
Programmable Temperature Humidity Stability Test Chamber Feature • LCD Touch Screen (TATO TT5166) • PID Control of Temperature and Humidity • Both Temperature and Humidity are Programmable (can have 100 pattern, each pattern has 999 segment) • With Humidity Sensor •With thermostats (prevent overheat) • Test Hole (50 mm diameter) • With Data Storage function by US...
We are happy to announce the availability of new version of QuickPHOTO microcope software. The version 3.2 adds the possibility to measure in imperial units which are commonly used in US industry. The user can switch between micrometers, millimeters, inches, and mils (thou). The software was localized to Traditional Chinese and is now available in 10 languages. The us...
Summary Ash content of coal means after burned the coal at a certain temperature measure the residue percentage of the content. How much ash content is a measure of the calorific value of coal is an important technical indicators, it is one of the main basis for evaluation of coal quality and sales pricing. So control the quality of the stability of coal ash is an impor...
The latest innovation in gas measuring systems entirely PL”d” and ATEX TÜV Rheinland Certified. SYSTEM INTRODUCTION Our Infrared gas monitoring system, “Sagittarius 5000”, has been designed and manufactured in accordance with the Essential Health and Safety Requirements laid down in the directive 94/9/EC, commonly referred to as AtEx “Atmosphères Explosibles” directiv...
Residues of drugs or transformation products of those are often found in human excretions, which are discarded into the wastewater. The drawn from the wastewater sewage sludge is partially distributed as fertilizer onto fields. It is also common knowledge that antibiotics are added to animal feed. Remainders of these again are applied across fields as dung and liquid man...
Technical Data 1. Measuring range: 0-25mm 2. Resolution: 0.001mm 3. Accuracy: ±0.003mm 4. Protection: IP65 5. Measuring force: 5-10N 6. Power consumption: <=20uA 7. Storage temperature: -20℃-60℃ 8. Operating temperature: 0℃-40℃ 9. ON/OFF...SET key: Power switch, Datum set 10. ABS...in/mm key: Absolute and relative measuring 11. Quick display of the measured v...
LX-F type sponge durometer is suitable for the determination of soft foam, polyurethane foam rubber products' hardness. And it will be different with other hardness testers in the aspects of using. When using, the preser foot directly contacts with the sample, and we'll see its own weight as force measurement load. Technical Data 1. Scope of pressure needle routeL: 0...
