Leinfelden-Echterdingen, Germany, October 10, 2024—Creaform, a business of AMETEK, Inc. and worldwide provider of automated and portable 3D measurement solutions, announced today the release of VXintegrity 3.0, which introduces new key functionalities that will help performing oil and gas infrastructure fitness-for-service (FFS) evaluations. Creaform’s latest NDT softwar...
gfai tech presents the latest innovation in quality assurance: the WaveHitMAX MK2 modal hammer! The WaveHitMAX is known for its high precision in structural dynamic applications and is the first intelligent impulse hammer that guarantees fully automatic, reproducible single impact excitations. Say goodbye to tedious manual adjustments! The new WaveHitMAX MK2 builds on th...
gfai tech presents an innovative solution for identifying defects in wind turbines more quickly and efficiently: the Acoustic Camera. With this technology, noise emissions that indicate potential operational faults can be precisely recorded and analysed. This leads to a significant improvement in the efficiency and reliability of wind turbines. Targeted localisation of ...
In 1928, Richard Drew invented Scotch tape in St. Paul, Minnesota. The surface of the tape is coated with a layer of adhesive to make the tape stick to the item. The earliest adhesives came from animals and plants, and in the nineteenth century, rubber was the main component of adhesives, while in modern times, various polymers are widely used.
MCD-6 Pad friction coefficient testing machine is mainly used for testing wire rope and pad friction coefficient, which is LIANGONG professional research and development to test the wire rope on the friction pad in a variety of environments wear performance and display defects. This machine uses the computer graphics tracking control system, real-time display test force,...
Usage: This tester can meet the " metal tensile creep and stress-rupture test method "requirements of the aviation industry standards HB 5067-85, GB/T2039. Mainly used for room temperature (high) stress-rupture test of metal, nonmetal, composite materials and components. It's the commonly used equipment for material property test in metallurgical department, research in...
The new digital revolution, transport safety and decarbonisation are the major challenges facing the rail sector today, and these technological challenges are being met to ensure up-to-date rail mobility that provides a better passenger experience. To this end, trains, trams and metros have new safety, surveillance and infotainment systems that have to be tested for clim...
Fiberscope.net is introducing the NEXUS X3 Videoscope, designed for professionals who need a reliable, flexible tool for inspections in confined spaces. What makes the NEXUS X3 different is its interchangeable insertion probes, allowing users to switch probes depending on the specific task. Its mechanical, all-way tip articulation gives precise control, making it ideal f...
In the machining industry, every detail is crucial. Using reliable and precise tools in your production process is vital to guaranteeing the quality of your end products. To meet this requirement, Metrios measuring systems were developed. The Metrios range provides a variety of models with different levels of precision, making it an ideal measurement solution for all ...
Zoom in on the WaterTest™ Kit, a quick and easy solution for detecting the presence of water in your oils, fuels and solvents! The presence of water in oil can cause serious problems such as degradation of lubricating properties, oxidation, corrosion and reduction of additive effectiveness. With the WaterTest™ Kit, detect water content and take action to avoid these pro...
Within the automotive sector, we must not forget motorbikes, a type of vehicle that we see every day and which, despite being smaller than other vehicles, has to pass environmental tests that are just as demanding as larger vehicles. All components have to withstand demanding environmental conditions. The AFA-200/640 oven has been manufactured according to the customer...
The "camera" is a familiar accessory in our lives, from smartphones to cars to laptops, almost everywhere. So what is a good camera? The criteria may be little known. Today, let's focus on Haida Instruments' star products, which are designed to detect cameras that can stand up in extreme environments. First, in the face of ubiquitous air dust, these fine particles can e...
At RAYPA, we understand that safe and efficient handling of heavy loads is essential in the sterilization process with large-volume autoclaves. That is why we offer a range of integrated and mobile basket lift systems for our Top Line and Classic Line autoclaves. Our integrated FIX-LIFT basket lift system, made of stainless steel, is the ideal electric solution for Top ...
Zoom in on the Digital Precision Oil Tester (DPOT™), the most innovative water content analyser for your oils, fuels and solvents! At GESERCO, our priority is to provide tools and solutions tailored to specific needs. With DPOT™, we offer a simple, accurate and rapid water content analyser, without the use of hazardous reagents. Versatile, DPOT™ delivers results in ju...
Throughout their lifetime, vehicle parts not only face adverse environmental conditions, but also undergo vibrations during use. This is why climatic chambers combined with vibration allow both tests to be combined in a single piece of equipment, so that the tests are as realistic as possible to guarantee the correct functioning of the samples during their use in vehicle...
Our portable mini-laboratories redefine how professionals can monitor their machines directly in the field. They become mobile companions, anticipating maintenance needs and promoting a proactive approach to the health of the equipment. Choosing GESERCO means opting for speed, precision, and convenience. Imagine being able to make informed decisions in real-time, witho...
The IEC 60068-2-1 standard details low temperature test methods applicable to non-heat dissipating and heat dissipating samples. The test is designed to determine the ability of components, equipment or other items to be used, transported or stored at low temperatures and whether they will remain operational under these conditions. The Bench-top Temperature and Humidity ...
SHINING 3D proudly unveils FreeScan UE Pro2, an innovative Wireless Multi-Functional Laser Handheld 3D Scanner, launched on September 5th, 2024. Ideal for on-site inspections and versatile applications, FreeScan UE Pro2 sets a new standard in portable 3D metrology world. Based on the capabilities of FreeScan UE series, FreeScan UE Pro2 features an innovative integrated...
In the field of materials science and engineering, material aging performance is a very important consideration. Over time, materials will gradually undergo changes in physical, chemical or mechanical properties under the influence of the external environment. This phenomenon is called material aging. In order to evaluate the aging performance of materials, scientists ha...
The automobile differential is a device composed of left and right half shaft gears, two planetary gears and a gear frame. The function is to ensure that the driving wheels on both sides do pure rolling motion. Generally speaking, automobile differential needs to do dynamic balancing under the following situations: 1.More obvious impact can be felt when start or accelera...
The SWT-1A wear-resistant testing machine is mainly used to test the wear resistance of natural granite, marble, and other building decoration materials (such as artificial stone, microcrystalline glass, etc.). This testing machine is designed and manufactured in accordance with the requirements for test performance in ASTM C 241 <Standard Test Method for Abrasion Resist...
1.Introduction 1.1.This machine is mainly used for the gauge marks (also used for non-metal materials) of the plate specimens referred to in the GB/T 228 standard. In the tensile test, in order to facilitate the observation and measurement of the gauge length of the specimen and other technical parameters, the surface of the specimen is marked with a scribe, and at the s...
The cosmetic products that we use on a daily basis are not exempt from strict quality control through climatic tests. These tests are used to evaluate the behaviour of chemical components and packaging throughout the product's service life. The CCK-25/48T climatic chamber is a standard chamber with a small volume of 48 litres for testing several small samples in paral...
Among the various fields of technology, battery technology is an indispensable energy storage solution in modern life, playing a crucial role in mobile devices, electric vehicles, and renewable energy. However, the performance and lifespan of batteries are often affected by environmental conditions such as temperature and humidity.
RAYPA is proud to announce the launch of its latest innovation in sterilization technology: the TLV-DUAL Series. These state-of-the-art autoclaves are part of our Top Line portfolio, designed to meet the rigorous demands of the pharmaceutical and biotechnology industries while ensuring fast, safe sterilization in compliance with FDA, GMP, and GLP standards. The TLV-DUAL...
The electricity that reaches us at home is such a common element that we sometimes forget that this energy reaches us through an external network subjected to the inclemency of the weather, from intense cold to high summer temperatures. In order to guarantee the distribution of electrical energy, it is necessary to subject the different elements of the electrical network...
The aerospace industry is one of the most demanding when it comes to testing the different components to be installed in aircraft and space shuttles, this is essential to guarantee the resistance of the materials to the extreme conditions that the materials will encounter during their use. Our standard equipment can be modified to meet more demanding conditions than thos...
In the pursuit of industrial precision and efficiency today, we are proud to introduce the JP universal joint drive 15 ton balancing machine - a precision machine designed for heavy workpieces. This balancing machine not only meets the strict requirements of the industrial field with its excellent performance, but also provides the perfect balancing solution for various ...
ISO 11507: Artificial aging of paint and varnish coatings exposed to fluorescent ultraviolet light and water, as an internationally recognised test standard, it provides a scientific method and basis for the assessment of the aging performance of coatings in a simulated natural environment. Sonacme UV aging Test Chambe accurately complies with the ISO 11507 test standard...
A compact, all-in-one design that maximizes space inside the container, not only allowing for additional maintenance activities but also providing wide room for operators to easily access and work within the container. It is designed to test valves up to 8” in size, with a maximum working pressure of 800 bar for both GAS and HYDRO tests. For enhanced operator safety du...
One of the most significant challenges when using any media preparator is dealing with microbial contamination and the demanding manual cleaning tasks after each use. Fortunately, our media preparators are equipped with an exclusive automatic self-cleaning and disinfection system for the dispensing lines. In this regard, it is essential to follow good practices and alwa...
In our everyday life there are electronic components that do not suffer the extreme environmental conditions that others are subjected to. Components that surround us such as defibrillators, water meters, etc. Everyday elements that we can see in rooms where the environmental conditions will be moderate, which does not mean that they should not be subjected to climatic t...
Moving into a new home, the first thought of purchasing items is kitchen utensils and POTS. With the improvement of the quality of modern life, non-stick frying pan brings about the improvement of cooking quality, cooking skills have been greatly improved, clean kitchen utensils have become easier at the same time, life safety has been the focus of attention, then the qu...
1.Introduction: The notch test tests the resistance of PE pipes to slow crack growth. The notch milling machine produces V-shaped notches in polyolefin pipes in accordance with ISO 13479. The notched pipes are then subjected to a pressure test. 1.1 Simple and safe operation (1) convenient operation and clear visualization via integrated touch display. (2) fixation of th...
Industry Background Rubber products are widely used in construction, automobiles, medical treatment, electronics and other fields, so their quality and performance directly affect the safety and reliability of the products. Possible problems with rubber products include unqualified material composition, substandard physical properties, insufficient aging resistance, etc....
I, Introduction This testing machine is suitable for the ball stud shaft impact bending test in the global industry standard for the automotive industry. The machine is novel in structure and consists of a frame part, a lifting system, a hammer body, a single row ball stud mounting support, a safety protection system and a control system. The machine can adjust the impac...
